Electrical tester

LVD2 volt light, offered by Fluke combines a non-contact AC voltage detector and LED flashlight into one easy to use pen-style design. It features dual sensitivity detection, turning blue from 1” to 5” (2.54 cm to 12.7 cm) from the source and red when at the source. The LVD2 is a CAT IV 600 V rated and is suitable for commercial and industrial applications.

Key Features
• Non-contact AC voltage tester and LED flashlight
• Detects from 90 to 600 V AC
• Features dual-sensitivity for two levels of detection
• Indicates proximity to AC voltage source with blue light
• Indicates you’re at the source with red light
• Ultra-bright white LED light with 100,000-hour bulb life
• Safety rated to CAT IV 600 V
• Operating temperature 0°C to 50°C
• AAA battery included

Fluke 2042 adalah cable locator profesional untuk tujuan umum. Alat ini cocok untuk pelacakan kabel di dinding dan di bawah tanah, mencari sekering/pemutus sekering pada sirkuit akhir dan mencari pemotong serta korsleting dalam kabel dan sistem pemanasan lantai listrik. Alat ini juga dapat digunakan untuk melacak air metalik dan pipa pemanasan. Unit ini disuplai sebagai kit lengkap yang terdiri dari pemancar dan penerima dalam tas jinjing yang dibuat khusus. Penerima juga menggabungkan fungsi senter untuk bekerja di lokasi remang-remang.

Fitur utama
• Untuk semua aplikasi (kabel hidup atau mati) tanpa instrumen tambahan
• Set termasuk pemancar dan penerima
• Sinyal pengirim berkode digital yang terbukti menjamin identifikasi sinyal yang jernih
• Transmiter dengan layar LC untuk level pemancaran, kode pemancaran, dan tegangan eksternal
• Penerima dengan layar LC backlight untuk level sinyal penerimaan, kode sinyal penerimaan, dan indikasi tegangan langsung
• Penyesuaian sensitivitas sinyal penerimaan otomatis atau manual
• Sinyal penerimaan akustik yang dapat diganti
• Pematian Otomatis
• Fungsi lampu senter tambahan untuk bekerja di tempat gelap
• Tersedia transmiter tambahan untuk ekstensi agar dapat membedakan antara beberapa sinyal
Kepatuhan Keselamatan
Semua input dari Fluke 2042 terlindung pada peringkat EN61010-1 CAT III 300V.

The unique Fluke 9062 provides rotary field and motor rotation indication with the benefits of contact-less detection. Purpose made for commercial and industrial environments, the Fluke 9062 provides rapid indication of 3 phase rotation using test leads supplied or can be used to determine motor rotation on synchronous and asynchronous 3 phase motors. The contact-less detection is ideal for use on motors where the shaft is not visible. The included test probes have a variable clamping range for safe contact, also in industrial sockets.

Key Features
• 3 phase indication
• Indication of phase rotation
• Indication of motor rotation direction
• Contact free determination of the rotation direction of running motors

Penguji Elektrik T+PRO dan T+ menawarkan semua fungsionalitas yang dicari oleh ahli listrik dalam volt menterdan penguji tegangan serta kontinuitas:
• Keduanya memiliki tiga cara untuk mendeteksi tegangan ac/dc: cahaya, suara, getaran
• Keduanya menawarkan fungsionalitas tambahan dari perpindahan GFCI dan continuity beeper, plus kenyamanan lampu senter terpasang
• Penguji Elektrik T+PRO hadir dengan indikator medan perputaran untuk troubleshooting tiga fasa, pengukuran tahanan hingga 9,99 KOhms, serta layar LCD lampu latar untuk melihat lebih mudah
Lebih aman daripada penguji solenoid tradisional:
• Desain tester kondisi-solid
• Berperingkat CAT IV 600 V, CAT III 1000 V
• Sesuai dengan NFPA 70E*
Kekokohan dan kehandalan yang diharapkan pelanggan dari Fluke
* Saat digunakan dengan benar per Artikel 110.9 Penggunaan Peralatan (A) Instrumen dan Peralatan Uji

Fitur utama
Tersedia fungsionalitas tambahan hanya di T+PRO:
• Layar lampu latar LCD untuk melihat lebih jelas
• Resolusi layar 0,1 V, ideal untuk troubleshooting pencahayaan tegangan rendah
• Resistansi (Ohm) s/d 9,99 kOhms
• Indikasi Medan Rotasi
• Display Hold untuk melihat lebih mudah di tempat yang sulit untuk diuji
Fitur dan keunggulan T+PRO dan T+:
• 3 bentuk lampu indikasi tegangan ac/dc: lampu, suara, dan getaran untuk perlindungan dan kenyamanan tambahan
• Mendeteksi tegangan langsung bahkan saat baterai mati
• Kabel uji tugas berat ekstra yang dapat diganti untuk fleksibilitas dan daya tahan lebih lama
• Berperingkat CAT IV 600 V, CAT III 1000 V untuk menambah perlindungan pengguna
• Continuity beeper
• Lampu senter LED yang terang untuk bekerja di tempat bercahaya redup
• Perpindahan GFCI
• Beeper On/Off yang dapat diubah dapat dipilih menurut lingkungan Anda
• Sesuai dengan rekomendasi NFPA 70E terbaru*
• Probe uji yang dapat diganti untuk menambah fleksibilitas dan kenyamanan
• Penyimpanan probe yang nyaman di belakang
• Penahan probe untuk memudahkan pengujian
• Lampu peringatan tegangan berbahaya untuk perlindungan tambahan bagi pengguna
• Tali kabel uji disertakan untuk pengelolaan test lead yang lebih baik
• Tegangan AC/DC: 12 V – 600 V pada batang LED, 10,2 V – 600 V pada LCD (LCD hanya pada T+PRO)
• Pematian otomatis menghemat daya baterai
• Garansi 2 tahun
* Saat digunakan dengan benar per Artikel 110.9 Penggunaan Peralatan (A) Instrumen dan Peralatan Uji

Fluke T150 Voltage and Continuity Tester with LCD readout and additional resistance measurement
Fluke Two-pole Voltage and Continuity Testers give you fast test results the way you need them, with large, easy-to-use buttons, bright backlights, and clear audible and physical indicators designed for any work situation. Resistance measurements up to 1999 Ω. Display hold. Enhanced ergonomic design is easy to use (even with gloves on) and offers quick, secure probe docking.
Fluke T130 Voltage and Continuity Tester with backlit LCD readout
The Fluke T130 Voltage and Continuity Tester with large, easy-to-use buttons, a bright backlit LED indicator and LCD display, display hold, and clear audible and vibrating voltage indicators designed for any work situation.
Fluke T110 Voltage, Continuity Tester with switchable load
The Fluke T110 Voltage and Continuity Tester with electric torch, backlit LED indicator, clear audible and vibrating voltage indicator let you work with confidence, while getting test results the way you want them.
Fluke T90 Basic Voltage and Continuity Tester
The compact Fluke T90 Voltage and Continuity Tester gives you fast test results the way you need them in a slim design. Large, easy-to-use buttons, bright backlit LED indicators and clear audible indicator give quick results in any work situation.
How do we test our new and improved Two-Pole Voltage and Continuity Testers?

Two-pole voltage and continuity testers measure voltage, but just as important is when a two-pole tester tells you that there is NOT voltage present before working on any circuit. For you to rely on your two-pole tester, it has to be the most rugged and reliable tester you can find. That’s what Fluke’s redesigned two-pole testers give you.
Fluke knows the cable assembly is often where failures occur. The cable on any Two-Pole voltage and continuity tester is its weakest point- it is repeatedly bent, twisted, wrapped and put under constant strain. If the cable were to break, it could place you at an increased safety risk. Industry standards call for the cable to be tested to withstand a forty-five-degree bend, and still work after 5000 bend cycles. Fluke puts our testers through three times what the standard demands, flexing the cable over 150 degrees in each direction. This is why we can offer you our strongest voltage and continuity testers warranty ever.
Other useful features
• Dual insulated cable tested to 3x the required bend angle provides increased reliability and durability.
• Switchable load: avoid display of ghost voltages allowing you to draw more current from the circuit under test and avoid trip residual-current devices (RCDs)
• Backlit graduated scale and backlit indicators
• Built in electric torch for use in dark areas. (T110, T130, T150)
• Resistance testing to 1999 ohms. (T150)
• Audio on/off for testing in quiet areas. (T110, T130, T150)
• Improved probe docking for secure storage.
• Phase rotation indicator for 3-phase systems. (T110, T130, T150)
• Display hold freezes reading on display until your can view it comfortably. (T130, T150)
• Single-pole phase test offers fast identification of live conductors.
• Push-on probe tips, probe tip protector and storage accessory.
• Tip protector serves as an extra hand when opening UK electrical safety outlets.
• Low battery indicator.

Fitur utama
Fluke’s two-pole voltage and continuity testers are built to work the way you work. They give you the best combination of safety, ease-of-use and fast answers available anywhere.
• Designed according to IEC EN 61243-3:2014 to verify the absence of voltage – even with discharged batteries.
• CAT IV 600 V, CAT III 690 V safety rating
• With 4 ways to indicate the presence of voltage – LED indicator, LCD display, audible tone or tactile feedback, always know if hazardous voltage is present (digital display on T130, T150, vibration indicator on T110, T130, T150)

• Non-contact voltage detection from 90 to 1000 V AC
• Innovative 'Battery Check' ensures battery is in good condition*
• Integrated clip design, optimized for pocket storage

• Be aware of voltage easily - the tip glows red and a beeper sounds when voltage is detected
• Continuous self-test so you always know it’s working
• Voltage detection range for wide application use - 90 V to 1000 V AC or 200 V to 1000 V AC
• Audible/Silent mode for added convenience

• 3 phase indication
• Indication of phase rotation
• Clear LCD display
• No battery required

• Measure current up to 100 A without breaking the circuit
• Meter automatically selects AC or DC voltage, up to 600 V
• Resistance measurements up to 1000 Ω plus continuity test
• Work in tight spaces with detachable SlimReach™ probe tips

• OpenJaw™ design: measure current without breaking the circuit
• Tester automatically selects AC or DC voltage, up to 1000 V
• Work in tight spaces with detachable Slim Reach probe tips

• Measure AC voltage and current without touching a live wire
• Troubleshoot with all power supply measurements at-a-glance
• See AC voltage and current values without test leads

Fluke’s two-pole voltage and continuity testers are built to work the way you work. They give you the best combination of safety, ease-of-use and fast answers available anywhere.
• Designed according to IEC EN 61243-3:2014 to verify the absence of voltage – even with discharged batteries.
• CAT IV 600 V, CAT III 690 V safety rating
• With 4 ways to indicate the presence of voltage – LED indicator, LCD display, audible tone or tactile feedback, always know if hazardous voltage is present (digital display on T130, T150, vibration indicator on T110, T130, T150)