Electrical tester
Fluke 2AC Non-Contact Voltage Tester
• Non-contact voltage detection from 90 to 1000 V AC
• Innovative 'Battery Check' ensures battery is in good condition*
• Integrated clip design, optimized for pocket storage
• Innovative 'Battery Check' ensures battery is in good condition*
• Integrated clip design, optimized for pocket storage
Download
Produk Lainnya
• Be aware of voltage easily - the tip glows red and a beeper sounds when voltage is detected
• Continuous self-test so you always know it’s working
• Voltage detection range for wide application use - 90 V to 1000 V AC or 200 V to 1000 V AC
• Audible/Silent mode for added convenience
• Continuous self-test so you always know it’s working
• Voltage detection range for wide application use - 90 V to 1000 V AC or 200 V to 1000 V AC
• Audible/Silent mode for added convenience
Fluke PRV240 Proving Unit adalah sumber tegangan bertenaga baterai berukuran saku yang portabel. Alat ini unik karena menjadi sumber tegangan ac dan dc stabil untuk instrumen LoZ dan HiZ.
Dirancang untuk keamanan dan kepatuhan
Fluke PRV240 yang memberikan metode aman untuk memverifikasi alat uji listrik Anda beroperasi secara benar sebelum Anda melakukan pengujian secara langsung. Konsep TBT atau “Test Before Touch” (Uji Sebelum Menyentuh) mencakup pengujian alat Anda terhadap sumber langsung yang sudah diketahui sebelum dan sesudah pengukuran sebenarnya. Urutan ini untuk membuktikan bahwa alat uji Anda beroperasi secara benar selama pengukuran sebenarnya.
Lakukan verifikasi alat uji Anda tanpa terkena paparan kejutan listrik dan busur api listrik yang tidak perlu. Penggunaan PRV240 mengurangi kebutuhan perlengkapan pelindung pribadi (APD) apabila sebelum menguji, sumber tegangan yang diketahui tidak tersedia untuk diverifikasi alat uji atau multimeter Anda sebelum melakukan TBT. APD masih diperlukan ketika tidak ada pengujian tegangan.
Sekilas Produk
• LED tunggal menunjukkan fungsionalitas, menjadikan unit ini solusi sederhana agar sesuai dengan verifikasi TBT pada alat uji Anda
• Tegangan bersumber melalui kontak tersembunyi yang diaktifkan saat probe diuji dimasukkan untuk menghindari kontak yang tidak disengaja
• Termasuk Tali Gantung Magnetik TPak™
• Masa pakai baterai yang lama—5.000 tes per set empat baterai AA
Fitur utama
• Mengurangi risiko kejutan listrik dan busur api listrik dengan memvalidasi fungsionalitas alat uji tanpa menempatkan diri Anda dalam lingkungan listrik yang berpotensi berbahaya
• Sumber tegangan ac dan dc yang stabil—memasok dc/ac 240 V
• Kompatibel dengan impedansi tinggi atau impedansi rendah multimeter, clamp meter atau dua penguji tiang
Dirancang untuk keamanan dan kepatuhan
Fluke PRV240 yang memberikan metode aman untuk memverifikasi alat uji listrik Anda beroperasi secara benar sebelum Anda melakukan pengujian secara langsung. Konsep TBT atau “Test Before Touch” (Uji Sebelum Menyentuh) mencakup pengujian alat Anda terhadap sumber langsung yang sudah diketahui sebelum dan sesudah pengukuran sebenarnya. Urutan ini untuk membuktikan bahwa alat uji Anda beroperasi secara benar selama pengukuran sebenarnya.
Lakukan verifikasi alat uji Anda tanpa terkena paparan kejutan listrik dan busur api listrik yang tidak perlu. Penggunaan PRV240 mengurangi kebutuhan perlengkapan pelindung pribadi (APD) apabila sebelum menguji, sumber tegangan yang diketahui tidak tersedia untuk diverifikasi alat uji atau multimeter Anda sebelum melakukan TBT. APD masih diperlukan ketika tidak ada pengujian tegangan.
Sekilas Produk
• LED tunggal menunjukkan fungsionalitas, menjadikan unit ini solusi sederhana agar sesuai dengan verifikasi TBT pada alat uji Anda
• Tegangan bersumber melalui kontak tersembunyi yang diaktifkan saat probe diuji dimasukkan untuk menghindari kontak yang tidak disengaja
• Termasuk Tali Gantung Magnetik TPak™
• Masa pakai baterai yang lama—5.000 tes per set empat baterai AA
Fitur utama
• Mengurangi risiko kejutan listrik dan busur api listrik dengan memvalidasi fungsionalitas alat uji tanpa menempatkan diri Anda dalam lingkungan listrik yang berpotensi berbahaya
• Sumber tegangan ac dan dc yang stabil—memasok dc/ac 240 V
• Kompatibel dengan impedansi tinggi atau impedansi rendah multimeter, clamp meter atau dua penguji tiang
The Fluke 1623-2 GEO Earth Ground Tester offers data storage and download capabilities via USB port. World class accessories will simplify and speed up testing time.
Fluke 1623-2 GEO Earth Ground Tester summary
• 3- and 4-pole Fall-of-Potential, earth resistance loop testing
• 4-pole Soil Resistivity testing
• Selective earth ground rod testing using 1 clamp
• Stakeless earth ground rod testing using 2 clamps
• IP56 rated for outdoor use
• Rugged carrying case
• USB data storage and transfer
Fitur utama
Stakeless Testing
The Fluke 1623-2 earth ground tester is able to measure earth ground loop resistances using only clamps. With this test method, two clamps are placed around the earth ground rod and each are connected to the tester. No earth ground stakes are used at all. A known, fixed voltage is induced by one clamp and the current is measured using the second clamp. Then the tester automatically determines the resistance of the earth ground rod. This test method only works if a bonded earth ground system exists for the building or structure under test, but most are. If there is only one path to ground, like at many residential applications, the Stakeless method will not provide an acceptable value and the Fall-of-Potential test method must be used.
With Stakeless testing, the earth ground rod does not need to be disconnected - leaving the bonded earth ground system intact during test. Gone are the days of spending time placing and connecting stakes for each earth ground rod on your system - a major time saver. You can also perform earth ground tests in places you’ve not considered before: inside buildings, power pylons, or anywhere you don’t have access to soil.
The Most Complete Tester
The Fluke 1623-2 is a unique earth ground tester that can perform all four types of earth ground measurement.
• 3- and 4-Pole Fall-of-Potential (using stakes)
• 4-Pole Soil Resistivity Testing (using stakes)
• Selective Testing (using 1 clamp and stakes)
• Stakeless Testing (using 2 clamps only)
Fluke 1623-2 GEO Earth Ground Tester summary
• 3- and 4-pole Fall-of-Potential, earth resistance loop testing
• 4-pole Soil Resistivity testing
• Selective earth ground rod testing using 1 clamp
• Stakeless earth ground rod testing using 2 clamps
• IP56 rated for outdoor use
• Rugged carrying case
• USB data storage and transfer
Fitur utama
Stakeless Testing
The Fluke 1623-2 earth ground tester is able to measure earth ground loop resistances using only clamps. With this test method, two clamps are placed around the earth ground rod and each are connected to the tester. No earth ground stakes are used at all. A known, fixed voltage is induced by one clamp and the current is measured using the second clamp. Then the tester automatically determines the resistance of the earth ground rod. This test method only works if a bonded earth ground system exists for the building or structure under test, but most are. If there is only one path to ground, like at many residential applications, the Stakeless method will not provide an acceptable value and the Fall-of-Potential test method must be used.
With Stakeless testing, the earth ground rod does not need to be disconnected - leaving the bonded earth ground system intact during test. Gone are the days of spending time placing and connecting stakes for each earth ground rod on your system - a major time saver. You can also perform earth ground tests in places you’ve not considered before: inside buildings, power pylons, or anywhere you don’t have access to soil.
The Most Complete Tester
The Fluke 1623-2 is a unique earth ground tester that can perform all four types of earth ground measurement.
• 3- and 4-Pole Fall-of-Potential (using stakes)
• 4-Pole Soil Resistivity Testing (using stakes)
• Selective Testing (using 1 clamp and stakes)
• Stakeless Testing (using 2 clamps only)
The Fluke 1555 insulation resistance tester offers digital insulation testing up to 10 kV, making it ideal for testing high voltage equipment including switchgear, motors, generators and cables.
Data collection is easy using the Fluke Connect® wireless app. Remote operation lets you spend as little time as possible in potentially hazardous zones. Real-time trending shows a live graph on your phone, rather than a hard-to-read set of changing values. And you can create reports quickly, using pre-designed templates that you can customize with company logos. The 1555 insulation tester can now conduct the entire range of test voltages specified in IEEE 43-2000 with a best in class, 3 year warranty and CAT IV 600 V safety rating.
Other useful features:
• Automatic calculation of Dielectric Absorption (DAR) and Polarization Index (PI) with no additional setup
• Guard system eliminates the effect of surface leakage current on high-resistance measurements
• Selectable test voltages in 50 V steps from 250 V to 1000 V, and 100 V steps above 1000 V
• CAT III 1000 V, CAT IV 600 V safety rating
• Warning function alerts the user that line voltage is present and gives the voltage reading up to 600 V AC or DC for increased user safety
• Measurements can be stored in up to 99 memory locations, with each location assigned a unique, user defined, label for easy recall
• Long battery life gives the user over 750 tests between charges
• Large digital/analog LCD for easy viewing
• Capacitance and leakage current measurement
• Ramp function for breakdown testing
• Resistance measurements up to 2 TΩ
• Timer settings up to 99 minutes for timed tests
• 3-year warranty
Key Features
• Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
• Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
• Report creation using Fluke Connect desktop saves time and makes test results easier to understand
• Fluke Connect saves test results to the cloud for analysis and preventive maintenance
Data collection is easy using the Fluke Connect® wireless app. Remote operation lets you spend as little time as possible in potentially hazardous zones. Real-time trending shows a live graph on your phone, rather than a hard-to-read set of changing values. And you can create reports quickly, using pre-designed templates that you can customize with company logos. The 1555 insulation tester can now conduct the entire range of test voltages specified in IEEE 43-2000 with a best in class, 3 year warranty and CAT IV 600 V safety rating.
Other useful features:
• Automatic calculation of Dielectric Absorption (DAR) and Polarization Index (PI) with no additional setup
• Guard system eliminates the effect of surface leakage current on high-resistance measurements
• Selectable test voltages in 50 V steps from 250 V to 1000 V, and 100 V steps above 1000 V
• CAT III 1000 V, CAT IV 600 V safety rating
• Warning function alerts the user that line voltage is present and gives the voltage reading up to 600 V AC or DC for increased user safety
• Measurements can be stored in up to 99 memory locations, with each location assigned a unique, user defined, label for easy recall
• Long battery life gives the user over 750 tests between charges
• Large digital/analog LCD for easy viewing
• Capacitance and leakage current measurement
• Ramp function for breakdown testing
• Resistance measurements up to 2 TΩ
• Timer settings up to 99 minutes for timed tests
• 3-year warranty
Key Features
• Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone
• Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
• Report creation using Fluke Connect desktop saves time and makes test results easier to understand
• Fluke Connect saves test results to the cloud for analysis and preventive maintenance