Fluke 1662 menawarkan keandalan Fluke, pengoperasian yang mudah, dan semua kemampuan pengujian yang diperlukan untuk pengujian instalasi sehari-hari.

Fitur utama
Fluke 1662 memberi lebih banyak daya di tangan Anda dengan menguji semua pengaturan lokal secara cepat dan efisien.
Fungsi pengukuran
• Fungsi pengukuran
• Tegangan & frekuensi
• Pemeriksa polaritas perkabelan, mendeteksi kerusakan kabel N
• Resistansi insulasi
• Kontinuitas & resistansi
• Pengukuran kumparan motor dengan pengujian kontinuitas
• Resistansi loop & line
• Prospective earth fault current (PEFC/IK)
• Prospective short-circuit current (PSC/IK)
• Waktu switching RCD
• Tingkat tripping RCD (pengujian ramp)
• Mengukur waktu trip & arus untuk RCD tipe A & AC dalam satu pengujian
• Arus variabel RCD
• Urutan pengujian RCD otomatis
• Indikator urutan fase
Fitur lainnya
• Auto Start otomatis yang dapat diaktifkan/dinonaktifkan untuk pengujian RCD & Loop
• Pengujian mandiri
• Tampilan yang terang
• Waktu dan tanggal (jika digunakan dengan perangkat lunak opsional FlukeView)
Aksesori yang disertakan
• Satu kabel jalur input tugas berat
• Hard case
• Probe remote control
• Zero adapter

Fluke 2042 adalah cable locator profesional untuk tujuan umum. Alat ini cocok untuk pelacakan kabel di dinding dan di bawah tanah, mencari sekering/pemutus sekering pada sirkuit akhir dan mencari pemotong serta korsleting dalam kabel dan sistem pemanasan lantai listrik. Alat ini juga dapat digunakan untuk melacak air metalik dan pipa pemanasan. Unit ini disuplai sebagai kit lengkap yang terdiri dari pemancar dan penerima dalam tas jinjing yang dibuat khusus. Penerima juga menggabungkan fungsi senter untuk bekerja di lokasi remang-remang.

Fitur utama
• Untuk semua aplikasi (kabel hidup atau mati) tanpa instrumen tambahan
• Set termasuk pemancar dan penerima
• Sinyal pengirim berkode digital yang terbukti menjamin identifikasi sinyal yang jernih
• Transmiter dengan layar LC untuk level pemancaran, kode pemancaran, dan tegangan eksternal
• Penerima dengan layar LC backlight untuk level sinyal penerimaan, kode sinyal penerimaan, dan indikasi tegangan langsung
• Penyesuaian sensitivitas sinyal penerimaan otomatis atau manual
• Sinyal penerimaan akustik yang dapat diganti
• Pematian Otomatis
• Fungsi lampu senter tambahan untuk bekerja di tempat gelap
• Tersedia transmiter tambahan untuk ekstensi agar dapat membedakan antara beberapa sinyal
Kepatuhan Keselamatan
Semua input dari Fluke 2042 terlindung pada peringkat EN61010-1 CAT III 300V.

Test the safety and performance of a type 1, level 1 or level 2 electric vehicle ac charging stations (EVSEs) with the Fluke FEV100. This test adapter simulates the presence of an electrical vehicle, allowing you to conduct tests in combination with appropriate test instruments such as a digital multimeter or oscilloscope. Use the FEV100 to verify an EVSE is working properly after install and during periodic maintenance, or troubleshoot an EVSE if it is not delivering the appropriate charge.
Electrical safety
EVSE charging cables may become damaged over the course of use, increasing electric shock risks to users. Stay protected from and check risk of electric shock with the GFCI trip test. This function verifies the breaker of the EVSE is connected by detecting ground faults. Additionally, the PE grounding protection pre-test verifies that there is no presence of dangerous voltage at the ground terminal.
Simplicity and convenience
Perform a variety of tests including ground fault checks, insulation of wires, measuring voltage and duty cycle to see max current available for charging all in one adapter that safely integrates with the Fluke portfolio of test and measurement tools. There is no need to bring an electric vehicle onsite for EVSE troubleshooting: the adapter acts as an electric vehicle when connected to an EVSE for easy performance and maintenance testing.
Recommended tools for use with the FEV100

Key features
• Check protective earth for correct wiring and functioning with the PE pre-test feature.
• Perform GFCI troubleshooting of EVSE and verify operation within safety standards.
• Test charging states of EVSE with CP state simulation.
• Verify charging voltage and maximum available current using a multimeter.
• SAE J1772 compliant to North American standards.

Fluke T150 Voltage and Continuity Tester with LCD readout and additional resistance measurement
Fluke Two-pole Voltage and Continuity Testers give you fast test results the way you need them, with large, easy-to-use buttons, bright backlights, and clear audible and physical indicators designed for any work situation. Resistance measurements up to 1999 Ω. Display hold. Enhanced ergonomic design is easy to use (even with gloves on) and offers quick, secure probe docking.
Fluke T130 Voltage and Continuity Tester with backlit LCD readout
The Fluke T130 Voltage and Continuity Tester with large, easy-to-use buttons, a bright backlit LED indicator and LCD display, display hold, and clear audible and vibrating voltage indicators designed for any work situation.
Fluke T110 Voltage, Continuity Tester with switchable load
The Fluke T110 Voltage and Continuity Tester with electric torch, backlit LED indicator, clear audible and vibrating voltage indicator let you work with confidence, while getting test results the way you want them.
Fluke T90 Basic Voltage and Continuity Tester
The compact Fluke T90 Voltage and Continuity Tester gives you fast test results the way you need them in a slim design. Large, easy-to-use buttons, bright backlit LED indicators and clear audible indicator give quick results in any work situation.
How do we test our new and improved Two-Pole Voltage and Continuity Testers?

Two-pole voltage and continuity testers measure voltage, but just as important is when a two-pole tester tells you that there is NOT voltage present before working on any circuit. For you to rely on your two-pole tester, it has to be the most rugged and reliable tester you can find. That’s what Fluke’s redesigned two-pole testers give you.
Fluke knows the cable assembly is often where failures occur. The cable on any Two-Pole voltage and continuity tester is its weakest point- it is repeatedly bent, twisted, wrapped and put under constant strain. If the cable were to break, it could place you at an increased safety risk. Industry standards call for the cable to be tested to withstand a forty-five-degree bend, and still work after 5000 bend cycles. Fluke puts our testers through three times what the standard demands, flexing the cable over 150 degrees in each direction. This is why we can offer you our strongest voltage and continuity testers warranty ever.
Other useful features
• Dual insulated cable tested to 3x the required bend angle provides increased reliability and durability.
• Switchable load: avoid display of ghost voltages allowing you to draw more current from the circuit under test and avoid trip residual-current devices (RCDs)
• Backlit graduated scale and backlit indicators
• Built in electric torch for use in dark areas. (T110, T130, T150)
• Resistance testing to 1999 ohms. (T150)
• Audio on/off for testing in quiet areas. (T110, T130, T150)
• Improved probe docking for secure storage.
• Phase rotation indicator for 3-phase systems. (T110, T130, T150)
• Display hold freezes reading on display until your can view it comfortably. (T130, T150)
• Single-pole phase test offers fast identification of live conductors.
• Push-on probe tips, probe tip protector and storage accessory.
• Tip protector serves as an extra hand when opening UK electrical safety outlets.
• Low battery indicator.

Fitur utama
Fluke’s two-pole voltage and continuity testers are built to work the way you work. They give you the best combination of safety, ease-of-use and fast answers available anywhere.
• Designed according to IEC EN 61243-3:2014 to verify the absence of voltage – even with discharged batteries.
• CAT IV 600 V, CAT III 690 V safety rating
• With 4 ways to indicate the presence of voltage – LED indicator, LCD display, audible tone or tactile feedback, always know if hazardous voltage is present (digital display on T130, T150, vibration indicator on T110, T130, T150)