kategori Produk
FILTER
Clamp Meter
Clamp meter digital dari Fluke adalah alat yang tangguh untuk penggunaan sehari-hari. Clamp meter amp ini dirancang untuk pengukuran yang andal dan tanpa noise. Dengan performa tingkat tinggi, jajaran produk clamp arus dirancang menjadi alat yang mudah dibawa dan digunakan, ideal untuk digunakan di ruang yang sempit, mengukur panel yang sulit dijangkau, atau menangani konduktor ekstra besar.
**Jika tidak menemukan produk yang anda cari, silahkan chat admin melalui whatsapp untuk cek ketersediaan barangnya
**Jika tidak menemukan produk yang anda cari, silahkan chat admin melalui whatsapp untuk cek ketersediaan barangnya
The Fluke 1630 is a MUST HAVE for those who are intent on improving the reliability of their systems and making it impervious to impulse damage. The Fluke 1630 is easy to use, highly accurate and an industry standard”- verified purchaser
The 1630-2 FC clamp measures earth ground loop resistances for multi-grounded systems using the dual-clamp jaw. This test technique eliminates the dangerous and time-consuming activity of disconnecting parallel grounds, as well as the process of finding suitable locations for auxiliary test stakes. You can also perform ground tests in places that were previously difficult: inside buildings, on power pylons or anywhere you don't have access to soil to place auxiliary test stakes.
Earth ground ac leakage current measurement
- Identify ac leakage currents without disconnecting the earth ground stake from the grounding system–ideal for system troubleshooting.
- Rugged heavy-duty clamp jaw stays in alignment and in calibration even in every day, on-the-job industrial environments.
Logging measurements
- The earth ground clamp saves time by automatically recording data at pre-set intervals
- Saves up to 32,760 measurements in memory at the set logging interval.
- Saves time by recording and storing measured values.
Alarm threshold
- User-defined high/low alarm limits, for rapid measurement evaluation.
Band-pass filter
- Selectable band-pass filter function removes unwanted noise from the ac leakage current measurement.
Fluke Connect® Wireless System
- The 1630-2 FC supports the Fluke Connect Wireless System connects the clamp with an app on your smartphone or tablet (may - not be available in all regions).
- You can save these measurements, and images to Fluke Connect Cloud storage and share with your team.
- Maximize uptime and make confident maintenance decisions with data you can trust and trace.
- Access baseline, historical and current measurements by asset.
- Share your measurement data using ShareLive™ video calls and emails.
- The 1630-2 FC is part of a growing system of connected test tools and equipment maintenance software. Visit the website to learn more about the Fluke Connect system.
The 1630-2 FC clamp measures earth ground loop resistances for multi-grounded systems using the dual-clamp jaw. This test technique eliminates the dangerous and time-consuming activity of disconnecting parallel grounds, as well as the process of finding suitable locations for auxiliary test stakes. You can also perform ground tests in places that were previously difficult: inside buildings, on power pylons or anywhere you don't have access to soil to place auxiliary test stakes.
Earth ground ac leakage current measurement
- Identify ac leakage currents without disconnecting the earth ground stake from the grounding system–ideal for system troubleshooting.
- Rugged heavy-duty clamp jaw stays in alignment and in calibration even in every day, on-the-job industrial environments.
Logging measurements
- The earth ground clamp saves time by automatically recording data at pre-set intervals
- Saves up to 32,760 measurements in memory at the set logging interval.
- Saves time by recording and storing measured values.
Alarm threshold
- User-defined high/low alarm limits, for rapid measurement evaluation.
Band-pass filter
- Selectable band-pass filter function removes unwanted noise from the ac leakage current measurement.
Fluke Connect® Wireless System
- The 1630-2 FC supports the Fluke Connect Wireless System connects the clamp with an app on your smartphone or tablet (may - not be available in all regions).
- You can save these measurements, and images to Fluke Connect Cloud storage and share with your team.
- Maximize uptime and make confident maintenance decisions with data you can trust and trace.
- Access baseline, historical and current measurements by asset.
- Share your measurement data using ShareLive™ video calls and emails.
- The 1630-2 FC is part of a growing system of connected test tools and equipment maintenance software. Visit the website to learn more about the Fluke Connect system.
The Fluke 393 FC CAT III 1500 V True-rms Solar Clamp Meter with iFlex is designed for solar photovoltaic (PV) installation technicians and maintenance professionals who work in high voltage DC environments: PV arrays, wind power, electric railways, data centers battery banks for uninterruptible power supplies. The clamp meter will measure up to 1500 V DC and 1000 V AC with test leads, and up to 999.9 A DC or AC through the clamp jaw. The included iFlex flexible current probe extends AC current measurements up to 2500 A. The 393 has a thin jaw, giving you access to cables in crowded combiner boxes. Plus, the test leads are designed with your work in mind, and are also rated to CAT III 1500 V DC.
Key functions of the solar clamp meter:
- IP54 rated, ideal for work outdoors including PV panel testing
- DC power measurement, showing readings in kVA
- Audio Polarity indicator helps prevent accidental miswires
- Visual Continuity provides a bright green light in the display, ideal when working in dark and noisy environments
- Logging and reporting of test results via Fluke Connect software
- When measuring ac current the included iFlex flexible current probe gives you unparalleled access to cable is tight spaces. The iFlex probe can be twisted through extremely small spaces and provide accurate current measurements.
The world's first CAT III 1500 V true-RMS solar clamp meter
Key functions of the solar clamp meter:
- IP54 rated, ideal for work outdoors including PV panel testing
- DC power measurement, showing readings in kVA
- Audio Polarity indicator helps prevent accidental miswires
- Visual Continuity provides a bright green light in the display, ideal when working in dark and noisy environments
- Logging and reporting of test results via Fluke Connect software
- When measuring ac current the included iFlex flexible current probe gives you unparalleled access to cable is tight spaces. The iFlex probe can be twisted through extremely small spaces and provide accurate current measurements.
The world's first CAT III 1500 V true-RMS solar clamp meter
Get ready for anything.
The Fluke 376 Clamp Meter offers improved performance for a wide range of flow size situations. With true-rms voltage and current rating, the Fluke 376 can read up to 1000 V and 1000 A in both ac and dc modes.
In addition, the Fluke 376 includes an iFlex™ flexible current probe that extends the measuring range to 2500 A ac while providing increased display flexibility, the ability to measure odd-sized conductors and increased cable access. The Fluke 376 is a direct replacement for the Fluke 337 Clamp Meter.
The Fluke 376 Clamp Meter offers improved performance for a wide range of flow size situations. With true-rms voltage and current rating, the Fluke 376 can read up to 1000 V and 1000 A in both ac and dc modes.
In addition, the Fluke 376 includes an iFlex™ flexible current probe that extends the measuring range to 2500 A ac while providing increased display flexibility, the ability to measure odd-sized conductors and increased cable access. The Fluke 376 is a direct replacement for the Fluke 337 Clamp Meter.
Reduced downtime - find current leaks without shutting down equipment
The Fluke 369 FC true-rms leakage current clamp meter helps users detect, document, record, and compare leakage current readings over time to prevent unexpected downtime, and identify intermittent trips of GFCI and RCDs, all without the need to turn the equipment off.
The Fluke 369 FC has a very large 61 mm clamp for working with extra large conductors. The clamps are fully coated so that they can accurately capture very small leakage signals, and can minimize external electromagnetic interference.
The Fluke 369 FC true-rms leakage current clamp meter helps users detect, document, record, and compare leakage current readings over time to prevent unexpected downtime, and identify intermittent trips of GFCI and RCDs, all without the need to turn the equipment off.
The Fluke 369 FC has a very large 61 mm clamp for working with extra large conductors. The clamps are fully coated so that they can accurately capture very small leakage signals, and can minimize external electromagnetic interference.
A versatile and rugged tool for high current applications
Confidently take reliable readings with true-rms, Fluke 355 and 353 digital clamp meters; the tool of choice for high current clamp-on amp meter sizes up to 2000 A. The extra wide jaws easily clamp around large conductors, which are typically found in high current applications. The extra robust design and CAT IV 600 V, CAT III 1000 V ratings add an extra element of user protection when performing high power measures.
Accurate peak measurements are possible using the in-rush inrush mode, ideal for motor and inductive loads. The 355 also measures voltage and resistance, making it an ideal clamp meter for utility, electrical contractors and industrial service technicians.
Confidently take reliable readings with true-rms, Fluke 355 and 353 digital clamp meters; the tool of choice for high current clamp-on amp meter sizes up to 2000 A. The extra wide jaws easily clamp around large conductors, which are typically found in high current applications. The extra robust design and CAT IV 600 V, CAT III 1000 V ratings add an extra element of user protection when performing high power measures.
Accurate peak measurements are possible using the in-rush inrush mode, ideal for motor and inductive loads. The 355 also measures voltage and resistance, making it an ideal clamp meter for utility, electrical contractors and industrial service technicians.
Sturdy Flukes. Reliable Flukes. Flukes are accurate.
True-rms measurements and optimized ergonomics make the 320 Series Clamp Meters the best general troubleshooting tool for commercial and residential electricians. The 323, 324 and 325 series are designed to check for the presence of load current, AC voltage and continuity of circuits, switches, fuses and contacts. These small, sturdy clamp gauges are ideally suited for current measurements up to 400 A in tight cable enclosures. The Fluke 325 also offers DC current and frequency measurements.
True-rms measurements and optimized ergonomics make the 320 Series Clamp Meters the best general troubleshooting tool for commercial and residential electricians. The 323, 324 and 325 series are designed to check for the presence of load current, AC voltage and continuity of circuits, switches, fuses and contacts. These small, sturdy clamp gauges are ideally suited for current measurements up to 400 A in tight cable enclosures. The Fluke 325 also offers DC current and frequency measurements.
The ACDC-54NAV clamp-on power meter offers AC/DC current measurements to 1000 A, AC/DC voltage to 1000 V, temperature capabilities, and wide jaws to handle large conductors up to 1.6″ (40 mm) for high voltage industrial environments.
This clamp-on multimeter offers a full range of power quality diagnostics including power and power factor, total harmonics distortion, individual harmonics, in-rush current, phase sequence, TRMS and low pass filter for industrial power monitoring and verifying system conditions.
This clamp-on multimeter offers a full range of power quality diagnostics including power and power factor, total harmonics distortion, individual harmonics, in-rush current, phase sequence, TRMS and low pass filter for industrial power monitoring and verifying system conditions.