Electrical tester
Fluke PRV240 Proving Unit
Fluke PRV240 Proving Unit adalah sumber tegangan bertenaga baterai berukuran saku yang portabel. Alat ini unik karena menjadi sumber tegangan ac dan dc stabil untuk instrumen LoZ dan HiZ.
Dirancang untuk keamanan dan kepatuhan
Fluke PRV240 yang memberikan metode aman untuk memverifikasi alat uji listrik Anda beroperasi secara benar sebelum Anda melakukan pengujian secara langsung. Konsep TBT atau “Test Before Touch” (Uji Sebelum Menyentuh) mencakup pengujian alat Anda terhadap sumber langsung yang sudah diketahui sebelum dan sesudah pengukuran sebenarnya. Urutan ini untuk membuktikan bahwa alat uji Anda beroperasi secara benar selama pengukuran sebenarnya.
Lakukan verifikasi alat uji Anda tanpa terkena paparan kejutan listrik dan busur api listrik yang tidak perlu. Penggunaan PRV240 mengurangi kebutuhan perlengkapan pelindung pribadi (APD) apabila sebelum menguji, sumber tegangan yang diketahui tidak tersedia untuk diverifikasi alat uji atau multimeter Anda sebelum melakukan TBT. APD masih diperlukan ketika tidak ada pengujian tegangan.
Sekilas Produk
• LED tunggal menunjukkan fungsionalitas, menjadikan unit ini solusi sederhana agar sesuai dengan verifikasi TBT pada alat uji Anda
• Tegangan bersumber melalui kontak tersembunyi yang diaktifkan saat probe diuji dimasukkan untuk menghindari kontak yang tidak disengaja
• Termasuk Tali Gantung Magnetik TPak™
• Masa pakai baterai yang lama—5.000 tes per set empat baterai AA
Fitur utama
• Mengurangi risiko kejutan listrik dan busur api listrik dengan memvalidasi fungsionalitas alat uji tanpa menempatkan diri Anda dalam lingkungan listrik yang berpotensi berbahaya
• Sumber tegangan ac dan dc yang stabil—memasok dc/ac 240 V
• Kompatibel dengan impedansi tinggi atau impedansi rendah multimeter, clamp meter atau dua penguji tiang
Dirancang untuk keamanan dan kepatuhan
Fluke PRV240 yang memberikan metode aman untuk memverifikasi alat uji listrik Anda beroperasi secara benar sebelum Anda melakukan pengujian secara langsung. Konsep TBT atau “Test Before Touch” (Uji Sebelum Menyentuh) mencakup pengujian alat Anda terhadap sumber langsung yang sudah diketahui sebelum dan sesudah pengukuran sebenarnya. Urutan ini untuk membuktikan bahwa alat uji Anda beroperasi secara benar selama pengukuran sebenarnya.
Lakukan verifikasi alat uji Anda tanpa terkena paparan kejutan listrik dan busur api listrik yang tidak perlu. Penggunaan PRV240 mengurangi kebutuhan perlengkapan pelindung pribadi (APD) apabila sebelum menguji, sumber tegangan yang diketahui tidak tersedia untuk diverifikasi alat uji atau multimeter Anda sebelum melakukan TBT. APD masih diperlukan ketika tidak ada pengujian tegangan.
Sekilas Produk
• LED tunggal menunjukkan fungsionalitas, menjadikan unit ini solusi sederhana agar sesuai dengan verifikasi TBT pada alat uji Anda
• Tegangan bersumber melalui kontak tersembunyi yang diaktifkan saat probe diuji dimasukkan untuk menghindari kontak yang tidak disengaja
• Termasuk Tali Gantung Magnetik TPak™
• Masa pakai baterai yang lama—5.000 tes per set empat baterai AA
Fitur utama
• Mengurangi risiko kejutan listrik dan busur api listrik dengan memvalidasi fungsionalitas alat uji tanpa menempatkan diri Anda dalam lingkungan listrik yang berpotensi berbahaya
• Sumber tegangan ac dan dc yang stabil—memasok dc/ac 240 V
• Kompatibel dengan impedansi tinggi atau impedansi rendah multimeter, clamp meter atau dua penguji tiang
Download
Product Lainnya
• Measure AC voltage and current without touching a live wire
• Troubleshoot with all power supply measurements at-a-glance
• See AC voltage and current values without test leads
• Troubleshoot with all power supply measurements at-a-glance
• See AC voltage and current values without test leads
• 3 phase indication
• Indication of phase rotation
• Clear LCD display
• No battery required
• Indication of phase rotation
• Clear LCD display
• No battery required
The Fluke 1503 is a great choice for basic residential and commercial electrical insulation testing. This rugged, compact tool fits in the palm of your hand. The 1503 is the same form factor as the Fluke 1507 but with a few less features. You can count on it to handle the most common tests at a most affordable price. Additional features, like the remote probe, reduce the time needed to perform repetitive testing.
Other useful capabilities:
• Measures AC/DC voltage from 0.1 V to 600 V
• Includes auto-discharge of capacitive voltage for added user protection
• Provides lo-ohms earth-bond continuity (200 mA)
• Simplifies repetitive or hard-to-reach testing with the remote test probe
• Saves battery power with auto power off
• Presents results on a large, backlit display
• Features CAT IV 600 V overvoltage category rating
• Comes with remote probe, test leads, test probes, alligator clips, and one-year warranty
• Accepts optional Fluke TPAK magnetic hanging system to free your hands for other work
• Runs on four AA alkaline batteries (NEDA 15 A or IEC LR6) for at least 1000 insulation tests
Key Features
• A rugged, compact insulation resistance tester for residential and commercial electricians
• Performs insulation tests from 0.01 MΩ to 2000 MΩ
• Offers two insulation test voltages: 500 V and 1000 V
• Includes live circuit detection to prevent insulation test if voltage >30 V is detected
• Measures resistance from 0.01 Ω to 20.00 kΩ
Other useful capabilities:
• Measures AC/DC voltage from 0.1 V to 600 V
• Includes auto-discharge of capacitive voltage for added user protection
• Provides lo-ohms earth-bond continuity (200 mA)
• Simplifies repetitive or hard-to-reach testing with the remote test probe
• Saves battery power with auto power off
• Presents results on a large, backlit display
• Features CAT IV 600 V overvoltage category rating
• Comes with remote probe, test leads, test probes, alligator clips, and one-year warranty
• Accepts optional Fluke TPAK magnetic hanging system to free your hands for other work
• Runs on four AA alkaline batteries (NEDA 15 A or IEC LR6) for at least 1000 insulation tests
Key Features
• A rugged, compact insulation resistance tester for residential and commercial electricians
• Performs insulation tests from 0.01 MΩ to 2000 MΩ
• Offers two insulation test voltages: 500 V and 1000 V
• Includes live circuit detection to prevent insulation test if voltage >30 V is detected
• Measures resistance from 0.01 Ω to 20.00 kΩ
Test the safety and performance of a type 1, level 1 or level 2 electric vehicle ac charging stations (EVSEs) with the Fluke FEV100. This test adapter simulates the presence of an electrical vehicle, allowing you to conduct tests in combination with appropriate test instruments such as a digital multimeter or oscilloscope. Use the FEV100 to verify an EVSE is working properly after install and during periodic maintenance, or troubleshoot an EVSE if it is not delivering the appropriate charge.
Electrical safety
EVSE charging cables may become damaged over the course of use, increasing electric shock risks to users. Stay protected from and check risk of electric shock with the GFCI trip test. This function verifies the breaker of the EVSE is connected by detecting ground faults. Additionally, the PE grounding protection pre-test verifies that there is no presence of dangerous voltage at the ground terminal.
Simplicity and convenience
Perform a variety of tests including ground fault checks, insulation of wires, measuring voltage and duty cycle to see max current available for charging all in one adapter that safely integrates with the Fluke portfolio of test and measurement tools. There is no need to bring an electric vehicle onsite for EVSE troubleshooting: the adapter acts as an electric vehicle when connected to an EVSE for easy performance and maintenance testing.
Recommended tools for use with the FEV100
Key features
• Check protective earth for correct wiring and functioning with the PE pre-test feature.
• Perform GFCI troubleshooting of EVSE and verify operation within safety standards.
• Test charging states of EVSE with CP state simulation.
• Verify charging voltage and maximum available current using a multimeter.
• SAE J1772 compliant to North American standards.
Electrical safety
EVSE charging cables may become damaged over the course of use, increasing electric shock risks to users. Stay protected from and check risk of electric shock with the GFCI trip test. This function verifies the breaker of the EVSE is connected by detecting ground faults. Additionally, the PE grounding protection pre-test verifies that there is no presence of dangerous voltage at the ground terminal.
Simplicity and convenience
Perform a variety of tests including ground fault checks, insulation of wires, measuring voltage and duty cycle to see max current available for charging all in one adapter that safely integrates with the Fluke portfolio of test and measurement tools. There is no need to bring an electric vehicle onsite for EVSE troubleshooting: the adapter acts as an electric vehicle when connected to an EVSE for easy performance and maintenance testing.
Recommended tools for use with the FEV100
Key features
• Check protective earth for correct wiring and functioning with the PE pre-test feature.
• Perform GFCI troubleshooting of EVSE and verify operation within safety standards.
• Test charging states of EVSE with CP state simulation.
• Verify charging voltage and maximum available current using a multimeter.
• SAE J1772 compliant to North American standards.