Electrical tester
Fluke LVD2 Non-Contact Voltage Tester
LVD2 volt light, offered by Fluke combines a non-contact AC voltage detector and LED flashlight into one easy to use pen-style design. It features dual sensitivity detection, turning blue from 1” to 5” (2.54 cm to 12.7 cm) from the source and red when at the source. The LVD2 is a CAT IV 600 V rated and is suitable for commercial and industrial applications.
Key Features
• Non-contact AC voltage tester and LED flashlight
• Detects from 90 to 600 V AC
• Features dual-sensitivity for two levels of detection
• Indicates proximity to AC voltage source with blue light
• Indicates you’re at the source with red light
• Ultra-bright white LED light with 100,000-hour bulb life
• Safety rated to CAT IV 600 V
• Operating temperature 0°C to 50°C
• AAA battery included
Key Features
• Non-contact AC voltage tester and LED flashlight
• Detects from 90 to 600 V AC
• Features dual-sensitivity for two levels of detection
• Indicates proximity to AC voltage source with blue light
• Indicates you’re at the source with red light
• Ultra-bright white LED light with 100,000-hour bulb life
• Safety rated to CAT IV 600 V
• Operating temperature 0°C to 50°C
• AAA battery included
Download
Product Lainnya
The Fluke 1507 is a versatile, compact, handheld insulation tester for advanced industrial and electrical insulation testing. Its multiple test voltages make it the ideal tool for many troubleshooting, commissioning, and preventative maintenance applications.
Take advantage of the 1507 full feature set to easily and quickly perform advanced insulation resistance testing. Its handy size and light weight make it easy to pack and use. Additional features, like the remote probe, save both time and money especially when performing repetitive tests. And its reasonable price and rugged reliability make it an excellent value.
Other useful capabilities:
• Performs insulation tests from 0.01 MΩ to 10 GΩ
• Includes live circuit detection to prevent insulation test if voltage >30 V is detected
• Includes auto-discharge of capacitive voltage for added user protection
• Measures AC/DC voltage from 0.1 V to 600 V and resistance from 0.01 Ω to 20.00 kΩ
• Provides lo-ohms earth-bond continuity (200 mA)
• Simplifies repetitive or hard-to-reach testing with the remote test probe
• Saves battery power with auto power off
• Presents results on a large, backlit display
• Features CAT IV 600 V overvoltage category rating
• Comes with remote probe, test leads, test probes, alligator clips and one-year warranty
• Accepts optional Fluke TPAK magnetic hanging system to free your hands for other work
• Runs on four AA alkaline batteries (NEDA 15 A or IEC LR6) for at least 1000 insulation tests
Key Features
• Rugged, compact advanced insulation resistance tester for electrical contractors and industrial and commercial electricians
• Automatically calculates Polarization Index and Dielectric Absorption Ratio
• Makes repetitive tests simple and easy with a Compare (Pass/Fail) function
• Offers multiple insulation test voltages: 50 V, 100 V, 250 V, 500 V, and 1000 V
Take advantage of the 1507 full feature set to easily and quickly perform advanced insulation resistance testing. Its handy size and light weight make it easy to pack and use. Additional features, like the remote probe, save both time and money especially when performing repetitive tests. And its reasonable price and rugged reliability make it an excellent value.
Other useful capabilities:
• Performs insulation tests from 0.01 MΩ to 10 GΩ
• Includes live circuit detection to prevent insulation test if voltage >30 V is detected
• Includes auto-discharge of capacitive voltage for added user protection
• Measures AC/DC voltage from 0.1 V to 600 V and resistance from 0.01 Ω to 20.00 kΩ
• Provides lo-ohms earth-bond continuity (200 mA)
• Simplifies repetitive or hard-to-reach testing with the remote test probe
• Saves battery power with auto power off
• Presents results on a large, backlit display
• Features CAT IV 600 V overvoltage category rating
• Comes with remote probe, test leads, test probes, alligator clips and one-year warranty
• Accepts optional Fluke TPAK magnetic hanging system to free your hands for other work
• Runs on four AA alkaline batteries (NEDA 15 A or IEC LR6) for at least 1000 insulation tests
Key Features
• Rugged, compact advanced insulation resistance tester for electrical contractors and industrial and commercial electricians
• Automatically calculates Polarization Index and Dielectric Absorption Ratio
• Makes repetitive tests simple and easy with a Compare (Pass/Fail) function
• Offers multiple insulation test voltages: 50 V, 100 V, 250 V, 500 V, and 1000 V
Reduced testing complexity, a simplified workflow and an intuitive user interface provide a new level of ease-of-use in battery testing.
• The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications
• The intuitive user interface, compact design and rugged construction ensure optimum performance, test results and reliability
• Covers a broad range of battery test functions ranging from DC voltage and resistance tests to full condition testing using automated string function testing and the test probe integrated infra-red temperature measurement system
• Designed for measurements on stationary batteries of all types.
Fluke BT510 key features:
• Battery Voltage – During the internal resistance test, Fluke Battery Analyzers also measure the voltage of the battery under test
• Discharge Volts – The Discharge mode collects the voltage of each battery multiple times at a user defined interval during a discharge or load test. Users can calculate the time a battery takes to drop to the cut-off voltage and use this time to determine the capacity loss of the battery
• Ripple Voltage Test – Measures unwanted residual ac component of the rectified voltage in dc charging and inverter circuits. Allows users to test ac components in dc charging circuits and find one of the root causes of battery deterioration
• Meter and Sequence Modes – The Meter mode is used for a quick test or troubleshooting. In this mode you can save and read the readings in a measurement or time sequence. The Sequence mode is for maintenance tasks with multiple power systems and battery strings. Before a task starts, users can configure a profile for the task for data management and report generation
• Threshold and Warning – Users can configure a maximum of 10 sets of thresholds and receive a Pass/ Warning/ Fail indication after each measurement
• Intercell Strap Resistance Test and Data Management – Measures the resistance of the intercell connection between batteries in a string.
• AutoHold – When AutoHold is turned on, a reading is captured when it remains stable for 1 second. The reading is then released when a new measurement starts
• AutoSave – When AutoSave is turned on, measured values are saved to internal memory automatically after an AutoHold reading is captured
• Fluke Battery Management Software – Easily import data from the Product to a PC. The measurement data and battery profile information is stored and archived with the Management Software and can be used for comparison and trend analysis. All measurement data, battery profile and analysis information can be used to easily generate reports
• Comprehensive logging – All measured values are automatically captured during testing and can be reviewed on the instrument before downloading for on the-go analysis
• Optimized user interface – Quick, guided setup ensures you're capturing the right data every time
• Battery life – 7.4 V 3000 mAh lithium-ion battery for more than eight hours continuous operation.
• USB port – For fast data download to supplied data analysis and report management application software.
• Highest safety rating in the industry – CAT III 600 V, 1000 V dc max. rated for safe measurements all around the battery power supply equipment.
Fluke BT520 Key features:
(Designed for measuring batteries in cabinets and hard to reach places)
• All of the above plus
• BTL20 Intelligent Test Probe set, with long and short probe extenders and built-in LCD display and speaker for visual and audio feedback
• BTL20ANG Intelligent Test Probe Set, with long and short angled tip probe extenders (no temperature sensor)
• Large soft carry case
Key Features
The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications
• Key measurements – Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.
• Sequence measurement mode – Automatic or manual sequence testing of battery strings with automatic measurement storage including voltage, resistance and temperature (with BTL21 intelligent test probe), eliminating the need to press a button each time a measurement needs to be saved.
• Comprehensive logging – All measured values are automatically captured during testing and can be reviewed on the instrument before downloading for on the-go analysis.
• The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications
• The intuitive user interface, compact design and rugged construction ensure optimum performance, test results and reliability
• Covers a broad range of battery test functions ranging from DC voltage and resistance tests to full condition testing using automated string function testing and the test probe integrated infra-red temperature measurement system
• Designed for measurements on stationary batteries of all types.
Fluke BT510 key features:
• Battery Voltage – During the internal resistance test, Fluke Battery Analyzers also measure the voltage of the battery under test
• Discharge Volts – The Discharge mode collects the voltage of each battery multiple times at a user defined interval during a discharge or load test. Users can calculate the time a battery takes to drop to the cut-off voltage and use this time to determine the capacity loss of the battery
• Ripple Voltage Test – Measures unwanted residual ac component of the rectified voltage in dc charging and inverter circuits. Allows users to test ac components in dc charging circuits and find one of the root causes of battery deterioration
• Meter and Sequence Modes – The Meter mode is used for a quick test or troubleshooting. In this mode you can save and read the readings in a measurement or time sequence. The Sequence mode is for maintenance tasks with multiple power systems and battery strings. Before a task starts, users can configure a profile for the task for data management and report generation
• Threshold and Warning – Users can configure a maximum of 10 sets of thresholds and receive a Pass/ Warning/ Fail indication after each measurement
• Intercell Strap Resistance Test and Data Management – Measures the resistance of the intercell connection between batteries in a string.
• AutoHold – When AutoHold is turned on, a reading is captured when it remains stable for 1 second. The reading is then released when a new measurement starts
• AutoSave – When AutoSave is turned on, measured values are saved to internal memory automatically after an AutoHold reading is captured
• Fluke Battery Management Software – Easily import data from the Product to a PC. The measurement data and battery profile information is stored and archived with the Management Software and can be used for comparison and trend analysis. All measurement data, battery profile and analysis information can be used to easily generate reports
• Comprehensive logging – All measured values are automatically captured during testing and can be reviewed on the instrument before downloading for on the-go analysis
• Optimized user interface – Quick, guided setup ensures you're capturing the right data every time
• Battery life – 7.4 V 3000 mAh lithium-ion battery for more than eight hours continuous operation.
• USB port – For fast data download to supplied data analysis and report management application software.
• Highest safety rating in the industry – CAT III 600 V, 1000 V dc max. rated for safe measurements all around the battery power supply equipment.
Fluke BT520 Key features:
(Designed for measuring batteries in cabinets and hard to reach places)
• All of the above plus
• BTL20 Intelligent Test Probe set, with long and short probe extenders and built-in LCD display and speaker for visual and audio feedback
• BTL20ANG Intelligent Test Probe Set, with long and short angled tip probe extenders (no temperature sensor)
• Large soft carry case
Key Features
The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications
• Key measurements – Internal battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and temperature.
• Sequence measurement mode – Automatic or manual sequence testing of battery strings with automatic measurement storage including voltage, resistance and temperature (with BTL21 intelligent test probe), eliminating the need to press a button each time a measurement needs to be saved.
• Comprehensive logging – All measured values are automatically captured during testing and can be reviewed on the instrument before downloading for on the-go analysis.
Fluke 1662 menawarkan keandalan Fluke, pengoperasian yang mudah, dan semua kemampuan pengujian yang diperlukan untuk pengujian instalasi sehari-hari.
Fitur utama
Fluke 1662 memberi lebih banyak daya di tangan Anda dengan menguji semua pengaturan lokal secara cepat dan efisien.
Fungsi pengukuran
• Fungsi pengukuran
• Tegangan & frekuensi
• Pemeriksa polaritas perkabelan, mendeteksi kerusakan kabel N
• Resistansi insulasi
• Kontinuitas & resistansi
• Pengukuran kumparan motor dengan pengujian kontinuitas
• Resistansi loop & line
• Prospective earth fault current (PEFC/IK)
• Prospective short-circuit current (PSC/IK)
• Waktu switching RCD
• Tingkat tripping RCD (pengujian ramp)
• Mengukur waktu trip & arus untuk RCD tipe A & AC dalam satu pengujian
• Arus variabel RCD
• Urutan pengujian RCD otomatis
• Indikator urutan fase
Fitur lainnya
• Auto Start otomatis yang dapat diaktifkan/dinonaktifkan untuk pengujian RCD & Loop
• Pengujian mandiri
• Tampilan yang terang
• Waktu dan tanggal (jika digunakan dengan perangkat lunak opsional FlukeView)
Aksesori yang disertakan
• Satu kabel jalur input tugas berat
• Hard case
• Probe remote control
• Zero adapter
Fitur utama
Fluke 1662 memberi lebih banyak daya di tangan Anda dengan menguji semua pengaturan lokal secara cepat dan efisien.
Fungsi pengukuran
• Fungsi pengukuran
• Tegangan & frekuensi
• Pemeriksa polaritas perkabelan, mendeteksi kerusakan kabel N
• Resistansi insulasi
• Kontinuitas & resistansi
• Pengukuran kumparan motor dengan pengujian kontinuitas
• Resistansi loop & line
• Prospective earth fault current (PEFC/IK)
• Prospective short-circuit current (PSC/IK)
• Waktu switching RCD
• Tingkat tripping RCD (pengujian ramp)
• Mengukur waktu trip & arus untuk RCD tipe A & AC dalam satu pengujian
• Arus variabel RCD
• Urutan pengujian RCD otomatis
• Indikator urutan fase
Fitur lainnya
• Auto Start otomatis yang dapat diaktifkan/dinonaktifkan untuk pengujian RCD & Loop
• Pengujian mandiri
• Tampilan yang terang
• Waktu dan tanggal (jika digunakan dengan perangkat lunak opsional FlukeView)
Aksesori yang disertakan
• Satu kabel jalur input tugas berat
• Hard case
• Probe remote control
• Zero adapter
Penguji Elektrik T+PRO dan T+ menawarkan semua fungsionalitas yang dicari oleh ahli listrik dalam volt menterdan penguji tegangan serta kontinuitas:
• Keduanya memiliki tiga cara untuk mendeteksi tegangan ac/dc: cahaya, suara, getaran
• Keduanya menawarkan fungsionalitas tambahan dari perpindahan GFCI dan continuity beeper, plus kenyamanan lampu senter terpasang
• Penguji Elektrik T+PRO hadir dengan indikator medan perputaran untuk troubleshooting tiga fasa, pengukuran tahanan hingga 9,99 KOhms, serta layar LCD lampu latar untuk melihat lebih mudah
Lebih aman daripada penguji solenoid tradisional:
• Desain tester kondisi-solid
• Berperingkat CAT IV 600 V, CAT III 1000 V
• Sesuai dengan NFPA 70E*
Kekokohan dan kehandalan yang diharapkan pelanggan dari Fluke
* Saat digunakan dengan benar per Artikel 110.9 Penggunaan Peralatan (A) Instrumen dan Peralatan Uji
Fitur utama
Tersedia fungsionalitas tambahan hanya di T+PRO:
• Layar lampu latar LCD untuk melihat lebih jelas
• Resolusi layar 0,1 V, ideal untuk troubleshooting pencahayaan tegangan rendah
• Resistansi (Ohm) s/d 9,99 kOhms
• Indikasi Medan Rotasi
• Display Hold untuk melihat lebih mudah di tempat yang sulit untuk diuji
Fitur dan keunggulan T+PRO dan T+:
• 3 bentuk lampu indikasi tegangan ac/dc: lampu, suara, dan getaran untuk perlindungan dan kenyamanan tambahan
• Mendeteksi tegangan langsung bahkan saat baterai mati
• Kabel uji tugas berat ekstra yang dapat diganti untuk fleksibilitas dan daya tahan lebih lama
• Berperingkat CAT IV 600 V, CAT III 1000 V untuk menambah perlindungan pengguna
• Continuity beeper
• Lampu senter LED yang terang untuk bekerja di tempat bercahaya redup
• Perpindahan GFCI
• Beeper On/Off yang dapat diubah dapat dipilih menurut lingkungan Anda
• Sesuai dengan rekomendasi NFPA 70E terbaru*
• Probe uji yang dapat diganti untuk menambah fleksibilitas dan kenyamanan
• Penyimpanan probe yang nyaman di belakang
• Penahan probe untuk memudahkan pengujian
• Lampu peringatan tegangan berbahaya untuk perlindungan tambahan bagi pengguna
• Tali kabel uji disertakan untuk pengelolaan test lead yang lebih baik
• Tegangan AC/DC: 12 V – 600 V pada batang LED, 10,2 V – 600 V pada LCD (LCD hanya pada T+PRO)
• Pematian otomatis menghemat daya baterai
• Garansi 2 tahun
* Saat digunakan dengan benar per Artikel 110.9 Penggunaan Peralatan (A) Instrumen dan Peralatan Uji
• Keduanya memiliki tiga cara untuk mendeteksi tegangan ac/dc: cahaya, suara, getaran
• Keduanya menawarkan fungsionalitas tambahan dari perpindahan GFCI dan continuity beeper, plus kenyamanan lampu senter terpasang
• Penguji Elektrik T+PRO hadir dengan indikator medan perputaran untuk troubleshooting tiga fasa, pengukuran tahanan hingga 9,99 KOhms, serta layar LCD lampu latar untuk melihat lebih mudah
Lebih aman daripada penguji solenoid tradisional:
• Desain tester kondisi-solid
• Berperingkat CAT IV 600 V, CAT III 1000 V
• Sesuai dengan NFPA 70E*
Kekokohan dan kehandalan yang diharapkan pelanggan dari Fluke
* Saat digunakan dengan benar per Artikel 110.9 Penggunaan Peralatan (A) Instrumen dan Peralatan Uji
Fitur utama
Tersedia fungsionalitas tambahan hanya di T+PRO:
• Layar lampu latar LCD untuk melihat lebih jelas
• Resolusi layar 0,1 V, ideal untuk troubleshooting pencahayaan tegangan rendah
• Resistansi (Ohm) s/d 9,99 kOhms
• Indikasi Medan Rotasi
• Display Hold untuk melihat lebih mudah di tempat yang sulit untuk diuji
Fitur dan keunggulan T+PRO dan T+:
• 3 bentuk lampu indikasi tegangan ac/dc: lampu, suara, dan getaran untuk perlindungan dan kenyamanan tambahan
• Mendeteksi tegangan langsung bahkan saat baterai mati
• Kabel uji tugas berat ekstra yang dapat diganti untuk fleksibilitas dan daya tahan lebih lama
• Berperingkat CAT IV 600 V, CAT III 1000 V untuk menambah perlindungan pengguna
• Continuity beeper
• Lampu senter LED yang terang untuk bekerja di tempat bercahaya redup
• Perpindahan GFCI
• Beeper On/Off yang dapat diubah dapat dipilih menurut lingkungan Anda
• Sesuai dengan rekomendasi NFPA 70E terbaru*
• Probe uji yang dapat diganti untuk menambah fleksibilitas dan kenyamanan
• Penyimpanan probe yang nyaman di belakang
• Penahan probe untuk memudahkan pengujian
• Lampu peringatan tegangan berbahaya untuk perlindungan tambahan bagi pengguna
• Tali kabel uji disertakan untuk pengelolaan test lead yang lebih baik
• Tegangan AC/DC: 12 V – 600 V pada batang LED, 10,2 V – 600 V pada LCD (LCD hanya pada T+PRO)
• Pematian otomatis menghemat daya baterai
• Garansi 2 tahun
* Saat digunakan dengan benar per Artikel 110.9 Penggunaan Peralatan (A) Instrumen dan Peralatan Uji