The VIBXPERT II from PRUFTECHNIK is the mobile power package for fast and reliable recording and analysis of machine condition data. After a very short measuring time, the current machine status data is shown on the color display. The maintenance expert can analyze the data on site. From the recorded machine condition data, all values can be read from the various characteristic value modes that are important for an exact machine condition analysis.
The device is used directly on site at the machine, from the machine hall to the diesel generator of an oil tanker or from a bucket excavator to a hydroelectric turbine. The robust design enables both fast and complex interventions. Whether in clinically clean systems, or harsh industrial environments. VIBXPERT II sets the standard in mobile machine and plant condition monitoring.
In addition to reliable, fast, and highly effective data analysis, the VIBXPERT II can also be used for operational balancing. This makes the VIBXPERT II the most powerful and effective device in mobile condition monitoring. VIBXPERT II is compatible with PRUFTECHNIK’s own OMNITREND Center analysis software, enabling highly efficient and precise analysis results. Center analysis software, enabling highly efficient and precise analysis results.

EDDYTHERM 2x handles work pieces and bearings up to 80 kg (176 lbs). These can be heated up to 240°C (465°F) by induction. Available options: 200 – 575V at 50/60Hz.
How does induction heating work? In just a few minutes, the bearings are safely preheated by induction so that they expand and glide effortlessly onto the shaft.

When the bearing cools down, it assumes its original size and thus guarantees the desired tight fit on the shaft. Due to the induction heat, all tolerances and material properties are maintained without any loss. No further work steps are necessary. EDDYTHERM is a safe bearing induction heating tool that only heats the work piece, not the tool itself.

The benefits of induction heating include safety, efficiency, and overall energy savings

ROTALIGN touch EX is Zone 1 ATEX/IECEX certified. Packed with user-friendly alignment features unique to PRUFTECHNIK, the ROTALIGN touch EX shortens the measurement time with:

• Continuous SWEEP Mode for high-quality measurement in only one shaft rotation
• Live Move function for simultaneous real-time machine corrections in both horizontal and vertical directions
• vertiSWEEP to measure vertical machines in one rotation of the shaft
Cardan shaft rotating-arm bracket allows measurements to be performed without removing the shaft
• Soft Foot Wizard to diagnose soft foot problems
• Move Simulator lets the operator simulate shim values and horizontal corrections before moving the machine

• On-board identification and location of the most common mechanical faults (bearings, misalignment, unbalance, looseness) focus maintenance efforts on root cause, reducing unplanned downtime
• Overall vibration level allows you to quickly assess overall machine health directly from the diagnosis screen
• Fault severity scale with four severity levels helps you prioritize maintenance work
• Repair recommendations advise technicians on corrective action
• Detailed diagnostic reports and spectral diagrams help confirm data quality, and narrow down the root cause of failures
• On-board context sensitive help provides real-time tips and guidance to new users