Alignment & Vibration
Fluke 805 Vibration Meter
• Reliable, repeatable, accurate device for checking bearings and overall vibration
• Features innovative sensor design that minimizes measurement variations caused by device angle or contact pressure
• Provides consistent data quality at both low and high frequency ranges
• Offers four-level severity scale to assess urgency of problems and bearing condition
• Features innovative sensor design that minimizes measurement variations caused by device angle or contact pressure
• Provides consistent data quality at both low and high frequency ranges
• Offers four-level severity scale to assess urgency of problems and bearing condition
Download
Product Lainnya
EDDYTHERM 2x handles work pieces and bearings up to 80 kg (176 lbs). These can be heated up to 240°C (465°F) by induction. Available options: 200 – 575V at 50/60Hz.
How does induction heating work? In just a few minutes, the bearings are safely preheated by induction so that they expand and glide effortlessly onto the shaft.
When the bearing cools down, it assumes its original size and thus guarantees the desired tight fit on the shaft. Due to the induction heat, all tolerances and material properties are maintained without any loss. No further work steps are necessary. EDDYTHERM is a safe bearing induction heating tool that only heats the work piece, not the tool itself.
The benefits of induction heating include safety, efficiency, and overall energy savings
How does induction heating work? In just a few minutes, the bearings are safely preheated by induction so that they expand and glide effortlessly onto the shaft.
When the bearing cools down, it assumes its original size and thus guarantees the desired tight fit on the shaft. Due to the induction heat, all tolerances and material properties are maintained without any loss. No further work steps are necessary. EDDYTHERM is a safe bearing induction heating tool that only heats the work piece, not the tool itself.
The benefits of induction heating include safety, efficiency, and overall energy savings
VIBGUARD IIoT offers a choice of 12, 16 or 20 measuring channels which are sampled in parallel and synchronously. This allows even the most complex equipment to be continuously monitored and protected against unplanned shutdowns.
VIBGUARD IIoT works autonomously and performs the measurement tasks automatically. The measurement data such as time signal, characteristic value, FFT spectrum, kinetic wave path (orbits), or torque are processed in parallel and almost in real time and can be correlated with the running production process. The fast data processing makes VIBGUARD IIoT the perfect monitoring and diagnostic system for systems with short operating cycles, such as cranes, machine tools, presses, or for machines with highly dynamic processes, such as test benches, wind turbines or chain conveyors. All critical fans and pumps can also be monitored easily but effectively with VIBGUARD IIoT.
VIBGUARD IIoT measures time signals, overall values, FFT spectra, shock pulse, orbits and much more on either 12, 16 or 20 parallel channels for almost all kind of signal inputs. Vibration, Tacho Pulse, temperature and any other relevant diagnostic inputs like torque are processed and can be correlated to the actual manufacturing process.
Measurements are integrated seamlessly to process control systems via a MQTT interface. Intelligent data management tools allow for efficient data reduction.
Advanced alarm handling tools like variable frequency band alarms and frequency band trending are available for monitoring specific machine failures like unbalance, misalignment, gear mesh and bearing failures.
VIBGUARD IIoT can easily be connected to the buffered outputs of real time protection systems in order to perform in-depth analysis and monitoring of turbomachinery
VIBGUARD IIoT works autonomously and performs the measurement tasks automatically. The measurement data such as time signal, characteristic value, FFT spectrum, kinetic wave path (orbits), or torque are processed in parallel and almost in real time and can be correlated with the running production process. The fast data processing makes VIBGUARD IIoT the perfect monitoring and diagnostic system for systems with short operating cycles, such as cranes, machine tools, presses, or for machines with highly dynamic processes, such as test benches, wind turbines or chain conveyors. All critical fans and pumps can also be monitored easily but effectively with VIBGUARD IIoT.
VIBGUARD IIoT measures time signals, overall values, FFT spectra, shock pulse, orbits and much more on either 12, 16 or 20 parallel channels for almost all kind of signal inputs. Vibration, Tacho Pulse, temperature and any other relevant diagnostic inputs like torque are processed and can be correlated to the actual manufacturing process.
Measurements are integrated seamlessly to process control systems via a MQTT interface. Intelligent data management tools allow for efficient data reduction.
Advanced alarm handling tools like variable frequency band alarms and frequency band trending are available for monitoring specific machine failures like unbalance, misalignment, gear mesh and bearing failures.
VIBGUARD IIoT can easily be connected to the buffered outputs of real time protection systems in order to perform in-depth analysis and monitoring of turbomachinery
RotAlign Touch is the flagship laser alignment tool from Prüftechnik, a complete system that delivers maximum value and ROI for your alignment work.
• Superior single-laser technology eliminates pre-alignment & simplifies short-distance measurements
• NEW: Modular Platform allows your software & sensor package to evolve with you
• Automatically filter out bad data, from backlash to vibrations
• Readjust mid-measurement when out of range
• Advanced alignment tasks: In-Situ Cardan shaft, simultaneous coupling alignment, thermal growth, and more
• Superior single-laser technology eliminates pre-alignment & simplifies short-distance measurements
• NEW: Modular Platform allows your software & sensor package to evolve with you
• Automatically filter out bad data, from backlash to vibrations
• Readjust mid-measurement when out of range
• Advanced alignment tasks: In-Situ Cardan shaft, simultaneous coupling alignment, thermal growth, and more
• On-board identification and location of the most common mechanical faults (bearings, misalignment, unbalance, looseness) focus maintenance efforts on root cause, reducing unplanned downtime
• Overall vibration level allows you to quickly assess overall machine health directly from the diagnosis screen
• Fault severity scale with four severity levels helps you prioritize maintenance work
• Repair recommendations advise technicians on corrective action
• Detailed diagnostic reports and spectral diagrams help confirm data quality, and narrow down the root cause of failures
• On-board context sensitive help provides real-time tips and guidance to new users
• Overall vibration level allows you to quickly assess overall machine health directly from the diagnosis screen
• Fault severity scale with four severity levels helps you prioritize maintenance work
• Repair recommendations advise technicians on corrective action
• Detailed diagnostic reports and spectral diagrams help confirm data quality, and narrow down the root cause of failures
• On-board context sensitive help provides real-time tips and guidance to new users