From the control room to the factory floor, the Fluke 80 Series digital multimeter has earned a reputation as the digital multimeter that industrial technicians trust. When productivity suffers, the Fluke 80 Series provides the accuracy and advanced troubleshooting capabilities you need to solve problems fast.

Use the low pass filter function to accurately measure voltage and frequency on electrically noisy equipment such as variable speed motor drives. Use the peak capture function to detect occasional faults and switch as fast as 250 microseconds (µs).

And work with confidence. The Input Alert function provides an audio alert against misuse of the input plug. The Fluke 80 Series multimeters have been tested separately for use in CAT IV 600 V/CAT III 1000 V environments. The Series can withstand impulses in excess of 8000 V and reduce the risks associated with surges and surges.

At Fluke, our ideas come straight from the workplace. We work with users like you to build test kits that do the job you want them to do for as long as you need them—and give you full value. We design and manufacture the Fluke 80 Series multimeters in the U.S.A. The 80 Series is backed by a limited lifetime warranty. And we back it with a limited lifetime warranty so you can work smarter, faster, and safer.

The Fluke 113 Digital Multimeter gives users the means to quickly and easily do basic testing. It is easy to use and is packed with the features needed to repair most electrical problems. The 113 features a large, backlit display for easy visibility in low-lit work environments. Plus, the integrated holster includes probe holders on the back, so your test leads can always be kept organized and where you need them.

Make measurements quickly with the 113

Whether you’re a utility worker, linesman, electrician, technician, anyone else working with basic electrical testing, the Fluke 113 includes the measurement features you need to tackle your job. The Fluke VCHEK™ LoZ low impedance measurement function lets users perform tests for voltage or continuity from the same dial position.
Please note that low impedance LoZ measurements will cause a low load on a circuit protected by a RCD, which will trip powered GFCI and RCD circuits when measuring Phase to Earth.
The meter also displays AC or DC voltage, depending on what was detected, while also rejecting ghost voltages from adjacent wires. If no voltage is detected, a continuity test is performed. The Min/Max function lets you record signal fluctuations.
The Fluke 113 digital multimeter can perform diode tests, and also provides both auto and manual ranging capabilities. With features such as conformance to the latest safety standards, backlight, and a much larger display that’s easier to view, this meter is a must have for every toolbox.

Key Features
• VCHEK™ LoZ low impedance measurement function to test for either AC or DC voltage, or show continuity if voltage is not detected.
• Large backlit display
• CAT IV 600 V safety rated

Menetapkan standar multimeter baru
Tiga model dari Seri 170 baru merupakan patokan baru untuk multimeter umum. Ketiganya menetapkan standar dengan kombinasi presisi, fitur, penggunaan yang mudah, keselamatan, dan keandalan.

Fitur utama
• Pengukuran arus dan tegangan RMS Sejati
• Akurasi dasar sebesar 0,09% (177, 179)
• Resolusi 6.000 hitungan
• Tampilan digital dengan analog bargraph dan backlight (177, 179)
• Rentang manual dan otomatis
• Display Hold dan Auto Hold
• Pengukuran frekuensi dan kapasitansi
• Pengukuran resistansi, kontinuitas, dan dioda
• Pengukuran suhu (179)
• Pencatatan min.-maks.-rata-rata
• Mode stabil memungkinkan penyaringan input berubah-ubah
• Penggantian baterai yang mudah tanpa membuka kotak luar
• Kalibrasi kotak tertutup melalui panel depan
• Kotak ergonomis dengan sarung pelindung terintegrasi
• EN61010-1 CAT III 1.000V / CAT IV 600 V
• Mengukur dua kali lebih cepat dari multimeter lain

Kepatuhan Keselamatan
Semua masukan terlindungi IEN61010-1 CAT IV 600 V/CAT III 1.000 V. Terdaftar UL, CSA, TÜV dan Menunggu Keputusan VDE

The 87V MAX contains all the trusted features of the most popular DMM in use today, the Fluke 87V, with many more extras.

Withstands drops of up to 4 meters (13 feet)
Fluke's most rugged digital multimeter. The 87V MAX features a rugged case for industrial use and a removable holster. This holster also doubles as a test probe holder for one-handed operation.

IP67 rated
Completely waterproof and dustproof, to work reliably anywhere you need to work.

Heat and cold resistant
This meter has a longer operating temperature range from -40 °C (for up to 20 minutes) to +55 °C.

Another product highlight
- True-rms ac current and voltage for accurate measurements on non-linear signals
- Measures up to 1000 V ac and dc
- Measures up to 10 A (20 A for 30 seconds)
- Frequency up to 200 kHz
- Built-in thermometer allows you to freely take temperature readings without having to carry a separate instrument
- Min/Max/Average recording, plus 250 µs Peak min-max to record variations automatically
- Unique function for accurate measurement of voltage and frequency in variable frequency motor drives and other electrically noisy equipment
- Large digit display, 2 brightness levels, white backlight, and backlit keypad keys for better visibility
- High resolution 19,999 digit mode display
- Long lasting battery life (800 hours)