The Fluke 113 Digital Multimeter gives users the means to quickly and easily do basic testing. It is easy to use and is packed with the features needed to repair most electrical problems. The 113 features a large, backlit display for easy visibility in low-lit work environments. Plus, the integrated holster includes probe holders on the back, so your test leads can always be kept organized and where you need them.

Make measurements quickly with the 113

Whether you’re a utility worker, linesman, electrician, technician, anyone else working with basic electrical testing, the Fluke 113 includes the measurement features you need to tackle your job. The Fluke VCHEK™ LoZ low impedance measurement function lets users perform tests for voltage or continuity from the same dial position.
Please note that low impedance LoZ measurements will cause a low load on a circuit protected by a RCD, which will trip powered GFCI and RCD circuits when measuring Phase to Earth.
The meter also displays AC or DC voltage, depending on what was detected, while also rejecting ghost voltages from adjacent wires. If no voltage is detected, a continuity test is performed. The Min/Max function lets you record signal fluctuations.
The Fluke 113 digital multimeter can perform diode tests, and also provides both auto and manual ranging capabilities. With features such as conformance to the latest safety standards, backlight, and a much larger display that’s easier to view, this meter is a must have for every toolbox.

Key Features
• VCHEK™ LoZ low impedance measurement function to test for either AC or DC voltage, or show continuity if voltage is not detected.
• Large backlit display
• CAT IV 600 V safety rated

Now there is one intrinsically safe digital multimeter (DMM) you can use in IIC (gas), in Zones 1 and 2, and IIIC (dust), Zones 21 and 22. Whether you work in an oil, chemical, or pharmaceutical environment , all the test and troubleshooting capabilities you need are in the most robust and intrinsically secure (IS) Fluke DMM ever made. The Fluke 28 II Ex is also water, dust and drop resistant. You will be equipped to solve all problems, inside and outside the danger zone, without compromising on compliance or measurement performance.

Semua masukan dilindungi terhadap CE, IEN61010-1 CAT III 600 V. UL, CSA, terdaftar TÜV, dan VDE.
Dirancang oleh ahli listrik. Dibuat oleh Fluke.
Pengukur true-rms yang mudah dibawa untuk teknisi servis lapangan. Fluke 115 merupakan solusi untuk berbagai aplikasi pengujian listrik dan elektronik.
Lihat juga Fluke 114 Electrical Multimeter, Fluke 116 HVAC Multimeter (pemanasan, ventilasi, dan pendingin udara) dengan Suhu dan Mikroamp, dan Fluke 117, the Electrician’s Multimeter dengan tegangan tanpa kontak.

Fitur utama
• Backlight LED putih yang besar untuk bekerja dalam area yang gelap
• Resistansi dan kontinuitas
• Min./Maks./Rata-Rata untuk mencatat fluktuasi sinyal
• Peringkat keselamatan CAT III 600 V

The Fluke 27 II Digital Multimeter define a the standard for operating in harsh conditions with the features and accuracy to troubleshoot most electrical problems. Both meters have IP 67 (waterproof and dustproof) rating, MSHA approvals, extended operating temperature range of -15 °C to +55 °C (5 °F to 131 °F, -40 °C for up to 20 minutes) and 95% humidity, and have been designed and tested to withstand a 3 m (10 ft) drop. The Fluke 20 Series Multimeters are built to work in the toughest environments.

Key Features
• Measure up to 1000 V AC and DC
• Measure up to 10 A (20 A for 30 seconds)
• 10,000 μF capacitance range
• Frequency to 200 kHz
• Extended AC voltage bandwidth – 40 Hz to 30 kHz
• Resistance, continuity and diode test
• Min/Max and average recording to capture variations automatically