Digital multimeter
Fluke 113 Digital Multimeter
The Fluke 113 Digital Multimeter gives users the means to quickly and easily do basic testing. It is easy to use and is packed with the features needed to repair most electrical problems. The 113 features a large, backlit display for easy visibility in low-lit work environments. Plus, the integrated holster includes probe holders on the back, so your test leads can always be kept organized and where you need them.
Make measurements quickly with the 113
Whether you’re a utility worker, linesman, electrician, technician, anyone else working with basic electrical testing, the Fluke 113 includes the measurement features you need to tackle your job. The Fluke VCHEK™ LoZ low impedance measurement function lets users perform tests for voltage or continuity from the same dial position.
Please note that low impedance LoZ measurements will cause a low load on a circuit protected by a RCD, which will trip powered GFCI and RCD circuits when measuring Phase to Earth.
The meter also displays AC or DC voltage, depending on what was detected, while also rejecting ghost voltages from adjacent wires. If no voltage is detected, a continuity test is performed. The Min/Max function lets you record signal fluctuations.
The Fluke 113 digital multimeter can perform diode tests, and also provides both auto and manual ranging capabilities. With features such as conformance to the latest safety standards, backlight, and a much larger display that’s easier to view, this meter is a must have for every toolbox.
Key Features
• VCHEK™ LoZ low impedance measurement function to test for either AC or DC voltage, or show continuity if voltage is not detected.
• Large backlit display
• CAT IV 600 V safety rated
Make measurements quickly with the 113
Whether you’re a utility worker, linesman, electrician, technician, anyone else working with basic electrical testing, the Fluke 113 includes the measurement features you need to tackle your job. The Fluke VCHEK™ LoZ low impedance measurement function lets users perform tests for voltage or continuity from the same dial position.
Please note that low impedance LoZ measurements will cause a low load on a circuit protected by a RCD, which will trip powered GFCI and RCD circuits when measuring Phase to Earth.
The meter also displays AC or DC voltage, depending on what was detected, while also rejecting ghost voltages from adjacent wires. If no voltage is detected, a continuity test is performed. The Min/Max function lets you record signal fluctuations.
The Fluke 113 digital multimeter can perform diode tests, and also provides both auto and manual ranging capabilities. With features such as conformance to the latest safety standards, backlight, and a much larger display that’s easier to view, this meter is a must have for every toolbox.
Key Features
• VCHEK™ LoZ low impedance measurement function to test for either AC or DC voltage, or show continuity if voltage is not detected.
• Large backlit display
• CAT IV 600 V safety rated
Download
Produk Lainnya
Compact true-rms meter for accurate electrical installation and troubleshooting
The Fluke 110 is a versatile multimeter for electrical measurements and troubleshooting. Trusted by residential and commercial electricians for troubleshooting and maintenance. The Fluke 110 is intended for professional use where true-rms accuracy is required.
Key product capabilities
- True-rms ac voltage for accurate measurements on non-linear signals
- Great white LED backlight for working in dark areas
- Resistance and continuity
- Min./Max./Average to record signal fluctuations
- CAT III 600 V safety rating
The Fluke 110 is a versatile multimeter for electrical measurements and troubleshooting. Trusted by residential and commercial electricians for troubleshooting and maintenance. The Fluke 110 is intended for professional use where true-rms accuracy is required.
Key product capabilities
- True-rms ac voltage for accurate measurements on non-linear signals
- Great white LED backlight for working in dark areas
- Resistance and continuity
- Min./Max./Average to record signal fluctuations
- CAT III 600 V safety rating
Double your strength
The Fluke 787 was the first device to combine a DMM and a loop calibrator to give process technicians double the power in one tool. Now even better, range is extended in the Fluke 789 – the ultimate loop calibration multimeter. The Fluke 789 has a 24-Volt supply loop which eliminates the need to take a separate power supply when testing transmitters offline. And with selectable onboard 250-Ohm Hart® resistors, the need to carry separate resistors is eliminated. Now process engineers can do more while carrying far less.
The Fluke 787 was the first device to combine a DMM and a loop calibrator to give process technicians double the power in one tool. Now even better, range is extended in the Fluke 789 – the ultimate loop calibration multimeter. The Fluke 789 has a 24-Volt supply loop which eliminates the need to take a separate power supply when testing transmitters offline. And with selectable onboard 250-Ohm Hart® resistors, the need to carry separate resistors is eliminated. Now process engineers can do more while carrying far less.
Industrial gauges for the toughest applications.
New diagnostic functionality to maximize in-factory productivity. The new Fluke 289 is the next generation of high performance industrial recording multimeters designed to solve complex problems in electronics, factory automation, power distribution and electromechanical equipment. With the ability to log data and display it graphically on the screen, you can resolve issues faster and help minimize downtime. Let the new Fluke 289 be the overseer of the system or process while you troubleshoot other issues.
Also be sure to check out the Fluke 287 True-rms Electronics Logging Multimeter with TrendCapture designed for electronics professionals.
Maximize productivity with the Fluke 289 and FlukeView combo kit. With built-in data logger capabilities and TrendCapture, the Fluke 289 helps you track down the occasional hard-to-find problem, monitoring equipment with every function while you do other tasks. Layer acquired data from six meters or six time periods to find cause and effect relationships or for condition monitoring in the FVF software. Turn your data into graphs and tables for professional reports. The 289/FVF combo kit gives you a simple & affordable approach to predictive maintenance.
New diagnostic functionality to maximize in-factory productivity. The new Fluke 289 is the next generation of high performance industrial recording multimeters designed to solve complex problems in electronics, factory automation, power distribution and electromechanical equipment. With the ability to log data and display it graphically on the screen, you can resolve issues faster and help minimize downtime. Let the new Fluke 289 be the overseer of the system or process while you troubleshoot other issues.
Also be sure to check out the Fluke 287 True-rms Electronics Logging Multimeter with TrendCapture designed for electronics professionals.
Maximize productivity with the Fluke 289 and FlukeView combo kit. With built-in data logger capabilities and TrendCapture, the Fluke 289 helps you track down the occasional hard-to-find problem, monitoring equipment with every function while you do other tasks. Layer acquired data from six meters or six time periods to find cause and effect relationships or for condition monitoring in the FVF software. Turn your data into graphs and tables for professional reports. The 289/FVF combo kit gives you a simple & affordable approach to predictive maintenance.
Now there is one intrinsically safe digital multimeter (DMM) you can use in IIC (gas), in Zones 1 and 2, and IIIC (dust), Zones 21 and 22. Whether you work in an oil, chemical, or pharmaceutical environment , all the test and troubleshooting capabilities you need are in the most robust and intrinsically secure (IS) Fluke DMM ever made. The Fluke 28 II Ex is also water, dust and drop resistant. You will be equipped to solve all problems, inside and outside the danger zone, without compromising on compliance or measurement performance.