Alignment & Vibration
Fluke 802EN Vibration Meter
Fluke 802EN Vibration Meter
One-button vibration assessment of mechanical equipment
Key features
• Three test modes to meet complex test environment in industrial field
• High repeatability to ensure accuracy of continuous testing
• One-button measurement to get assessment result in 6 seconds
• 99 sets of data storage, review in real-time
One-button vibration assessment of mechanical equipment
Key features
• Three test modes to meet complex test environment in industrial field
• High repeatability to ensure accuracy of continuous testing
• One-button measurement to get assessment result in 6 seconds
• 99 sets of data storage, review in real-time
Download
Produk Lainnya
ROTALIGN touch EX is Zone 1 ATEX/IECEX certified. Packed with user-friendly alignment features unique to PRUFTECHNIK, the ROTALIGN touch EX shortens the measurement time with:
• Continuous SWEEP Mode for high-quality measurement in only one shaft rotation
• Live Move function for simultaneous real-time machine corrections in both horizontal and vertical directions
• vertiSWEEP to measure vertical machines in one rotation of the shaft
Cardan shaft rotating-arm bracket allows measurements to be performed without removing the shaft
• Soft Foot Wizard to diagnose soft foot problems
• Move Simulator lets the operator simulate shim values and horizontal corrections before moving the machine
• Continuous SWEEP Mode for high-quality measurement in only one shaft rotation
• Live Move function for simultaneous real-time machine corrections in both horizontal and vertical directions
• vertiSWEEP to measure vertical machines in one rotation of the shaft
Cardan shaft rotating-arm bracket allows measurements to be performed without removing the shaft
• Soft Foot Wizard to diagnose soft foot problems
• Move Simulator lets the operator simulate shim values and horizontal corrections before moving the machine
• On-board identification and location of the most common mechanical faults (bearings, misalignment, unbalance, looseness) focus maintenance efforts on root cause, reducing unplanned downtime
• Overall vibration level allows you to quickly assess overall machine health directly from the diagnosis screen
• Fault severity scale with four severity levels helps you prioritize maintenance work
• Repair recommendations advise technicians on corrective action
• Detailed diagnostic reports and spectral diagrams help confirm data quality, and narrow down the root cause of failures
• On-board context sensitive help provides real-time tips and guidance to new users
• Overall vibration level allows you to quickly assess overall machine health directly from the diagnosis screen
• Fault severity scale with four severity levels helps you prioritize maintenance work
• Repair recommendations advise technicians on corrective action
• Detailed diagnostic reports and spectral diagrams help confirm data quality, and narrow down the root cause of failures
• On-board context sensitive help provides real-time tips and guidance to new users
The VibXpert 3 Balancer is an advanced smart condition monitoring field balancing tool that enables users to quickly and effectively correct unbalance faults.
With the VibXpert 3 Balancer, users can:
• Increase the reliability of their machinery by reducing excessive machine vibration levels
• Improve safety by reducing potential equipment hazards
• Improve uptime by promptly identifying and correcting unbalance
• Help meet industry standards and regulatory compliance requirements
• Improve energy efficiency of rotating machinery, providing cost savings
• Maximize the efficiency, quality, and accuracy of field balancing jobs
The result is extended peak operating asset performance, more effective resource use, and increased business value from operations.
Unbalance, resulting from uneven mass distribution around a rotational axis is the leading cause of unplanned downtime and costly damage.
Today, machines operate at variable speeds, sometimes near their engineered capacity, increasing the risk of resonant vibration. Balanced machines mitigate this risk. The VibXpert 3 Balancer offers a highly efficient and user-centric experience, faster balancing results with better insights, and enhanced fault detection on rotating assets.
Machine templates
It boasts an interactive user interface with preconfigured and customizable machine templates, reducing the complexity of the balancing process.
Modern data processing
Its modern data processing capability, optimized software-based calculations from raw sensor data offers faster measurements, complete insights during balancing (including overall vibration levels, FFT spectra, phase, and time waveform).
6-channel measurements
VibXpert 3 Balancer enhances fault detection through synchronous 6-channel measurement, enabling users to minimize overall vibration levels simultaneously across all machine measurement points
Enhanced balancing reports
Balancing reports encompassing all necessary information for users, including overall vibration levels, spectral graphs, polar plots, and machinery details, among others.
With the VibXpert 3 Balancer, users can:
• Increase the reliability of their machinery by reducing excessive machine vibration levels
• Improve safety by reducing potential equipment hazards
• Improve uptime by promptly identifying and correcting unbalance
• Help meet industry standards and regulatory compliance requirements
• Improve energy efficiency of rotating machinery, providing cost savings
• Maximize the efficiency, quality, and accuracy of field balancing jobs
The result is extended peak operating asset performance, more effective resource use, and increased business value from operations.
Unbalance, resulting from uneven mass distribution around a rotational axis is the leading cause of unplanned downtime and costly damage.
Today, machines operate at variable speeds, sometimes near their engineered capacity, increasing the risk of resonant vibration. Balanced machines mitigate this risk. The VibXpert 3 Balancer offers a highly efficient and user-centric experience, faster balancing results with better insights, and enhanced fault detection on rotating assets.
Machine templates
It boasts an interactive user interface with preconfigured and customizable machine templates, reducing the complexity of the balancing process.
Modern data processing
Its modern data processing capability, optimized software-based calculations from raw sensor data offers faster measurements, complete insights during balancing (including overall vibration levels, FFT spectra, phase, and time waveform).
6-channel measurements
VibXpert 3 Balancer enhances fault detection through synchronous 6-channel measurement, enabling users to minimize overall vibration levels simultaneously across all machine measurement points
Enhanced balancing reports
Balancing reports encompassing all necessary information for users, including overall vibration levels, spectral graphs, polar plots, and machinery details, among others.
A unique handheld measuring device with which even untrained personnel can easily and effectively measure machine vibration on rotating machinery. Thanks to its forward-looking measuring principle and data acquisition across three axes with the triaxial sensor, all relevant condition information is recorded with the touch of a single button. And at a measurement speed that opens up fully new dimensions. Not only is the VIBSCANNER 2 a breakthrough in terms of measurement speed and precision, but also through its robustness and its intuitive operating concept.
Depending on the filter settings, it measures overall values, spectra, and time signals synchronously in 3 axes. In combination with a triaxial sensor, VIBSCANNER 2 collects even more machine condition data per measurement location.
• Added value thanks to additional vibration data without affecting the measurement time
• Quick data acquisition thanks to synchronous measurement in 3 axes
• Clear channel assignment without any additional cable adapter
A triaxial sensor measures vibration in 3 perpendicular directions at once, while a single-axis sensoronly measures in one direction at a time. Certain conditions such as cocked bearing or a bent shaft can be identified in a single measurement with a triaxial sensor.
The bottom line: In combination with a triaxial sensor, VIBSCANNER 2 delivers even more comprehensive information per measurement location at the push of a button. This creates an overall image of the machine‘s health without affecting the measuring time.
Depending on the filter settings, it measures overall values, spectra, and time signals synchronously in 3 axes. In combination with a triaxial sensor, VIBSCANNER 2 collects even more machine condition data per measurement location.
• Added value thanks to additional vibration data without affecting the measurement time
• Quick data acquisition thanks to synchronous measurement in 3 axes
• Clear channel assignment without any additional cable adapter
A triaxial sensor measures vibration in 3 perpendicular directions at once, while a single-axis sensoronly measures in one direction at a time. Certain conditions such as cocked bearing or a bent shaft can be identified in a single measurement with a triaxial sensor.
The bottom line: In combination with a triaxial sensor, VIBSCANNER 2 delivers even more comprehensive information per measurement location at the push of a button. This creates an overall image of the machine‘s health without affecting the measuring time.