Electrical tester
Fluke 1625-2 GEO Earth Ground Tester Kit
The Fluke 1630-2 FC Stakeless Earth Ground Clamp is the kind of high-quality, rugged tool you expect from Fluke. Heavy-duty clamp jaw stays in alignment and in calibration even in every day, on-the-job industrial environments. Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes. Stay on line—identify ground loop resistance without the need to disconnect then reconnect the earth electrode from the system.
Stakeless earth ground measurement testing
• You can also perform earth ground tests in places you’ve not considered before: inside buildings, power pylons, or anywhere you don’t have access to soil
• The Fluke 1625-2 earth ground tester can measure earth ground loop resistances using only clamps
• With this test method, two clamps are placed around the earth ground rod and each are connected to the tester
The Fluke 1625-2 improves your earth ground testing process with:
• Automatic Frequency Control (AFC) - identifies existing interference and chooses a measurement frequency to minimize its effect, providing more accurate earth ground value
• R* measurement - calculates earth ground impedance at 55 Hz to more accurately reflect the earth ground resistance that a fault-to earth ground would see
• Adjustable limits - for quicker testing
The Fluke 1625-2 gives you versatility in earth ground testing[b]
• 3- and 4-pole fall-of-potential, earth resistance loop testing
• 4-pole soil resistivity testing
• Selective earth ground rod testing using 1 clamp
• Stakeless earth ground rod testing using 2 clamps
[b]The Fluke 1625-2 offers you simpler, faster earth ground tests than ever before
• The 1625-2 offers internal memory storage up to 1500 records
• Accessible via USB port for rapid data transfer and viewing of results
• This earth ground tester also gives you world-class accessories that take the tedium out of earth ground testing
Additional tool features
• Heavy duty stakes can be hammered into dry, hard soil.
• And new color-coded wires make setup simple and help eliminate mistakes and speed up setup and tear down time as much as 50%
• IP56 rated for outdoor use
• Rugged carrying case
Key Features
The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:
• 3- and 4-Pole Fall-of-Potential (using stakes)
• 4-Pole Soil Resistivity testing (using stakes)
• Selective testing (using 1 clamp and stakes)
• Stakeless testing (using 2 clamps only) Adjustable limits - for quicker testing
• IP56 rated for outdoor use
• Rugged carrying case
Stakeless earth ground measurement testing
• You can also perform earth ground tests in places you’ve not considered before: inside buildings, power pylons, or anywhere you don’t have access to soil
• The Fluke 1625-2 earth ground tester can measure earth ground loop resistances using only clamps
• With this test method, two clamps are placed around the earth ground rod and each are connected to the tester
The Fluke 1625-2 improves your earth ground testing process with:
• Automatic Frequency Control (AFC) - identifies existing interference and chooses a measurement frequency to minimize its effect, providing more accurate earth ground value
• R* measurement - calculates earth ground impedance at 55 Hz to more accurately reflect the earth ground resistance that a fault-to earth ground would see
• Adjustable limits - for quicker testing
The Fluke 1625-2 gives you versatility in earth ground testing[b]
• 3- and 4-pole fall-of-potential, earth resistance loop testing
• 4-pole soil resistivity testing
• Selective earth ground rod testing using 1 clamp
• Stakeless earth ground rod testing using 2 clamps
[b]The Fluke 1625-2 offers you simpler, faster earth ground tests than ever before
• The 1625-2 offers internal memory storage up to 1500 records
• Accessible via USB port for rapid data transfer and viewing of results
• This earth ground tester also gives you world-class accessories that take the tedium out of earth ground testing
Additional tool features
• Heavy duty stakes can be hammered into dry, hard soil.
• And new color-coded wires make setup simple and help eliminate mistakes and speed up setup and tear down time as much as 50%
• IP56 rated for outdoor use
• Rugged carrying case
Key Features
The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:
• 3- and 4-Pole Fall-of-Potential (using stakes)
• 4-Pole Soil Resistivity testing (using stakes)
• Selective testing (using 1 clamp and stakes)
• Stakeless testing (using 2 clamps only) Adjustable limits - for quicker testing
• IP56 rated for outdoor use
• Rugged carrying case
Download
Product Lainnya
The Fluke 1630-2 FC Stakeless Earth Ground Clamp is the kind of high-quality, rugged tool you expect from Fluke. Heavy-duty clamp jaw stays in alignment and in calibration even in every day, on-the-job industrial environments. Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes. Stay on line—identify ground loop resistance without the need to disconnect then reconnect the earth electrode from the system.
Stakeless earth ground measurement testing
• You can also perform earth ground tests in places you’ve not considered before: inside buildings, power pylons, or anywhere you don’t have access to soil
• The Fluke 1625-2 earth ground tester can measure earth ground loop resistances using only clamps
• With this test method, two clamps are placed around the earth ground rod and each are connected to the tester
The Fluke 1625-2 improves your earth ground testing process with:
• Automatic Frequency Control (AFC) - identifies existing interference and chooses a measurement frequency to minimize its effect, providing more accurate earth ground value
• R* measurement - calculates earth ground impedance at 55 Hz to more accurately reflect the earth ground resistance that a fault-to earth ground would see
• Adjustable limits - for quicker testing
The Fluke 1625-2 gives you versatility in earth ground testing[b]
• 3- and 4-pole fall-of-potential, earth resistance loop testing
• 4-pole soil resistivity testing
• Selective earth ground rod testing using 1 clamp
• Stakeless earth ground rod testing using 2 clamps
[b]The Fluke 1625-2 offers you simpler, faster earth ground tests than ever before
• The 1625-2 offers internal memory storage up to 1500 records
• Accessible via USB port for rapid data transfer and viewing of results
• This earth ground tester also gives you world-class accessories that take the tedium out of earth ground testing
Additional tool features
• Heavy duty stakes can be hammered into dry, hard soil.
• And new color-coded wires make setup simple and help eliminate mistakes and speed up setup and tear down time as much as 50%
• IP56 rated for outdoor use
• Rugged carrying case
Key Features
The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:
• 3- and 4-Pole Fall-of-Potential (using stakes)
• 4-Pole Soil Resistivity testing (using stakes)
• Selective testing (using 1 clamp and stakes)
• Stakeless testing (using 2 clamps only) Adjustable limits - for quicker testing
• IP56 rated for outdoor use
• Rugged carrying case
Stakeless earth ground measurement testing
• You can also perform earth ground tests in places you’ve not considered before: inside buildings, power pylons, or anywhere you don’t have access to soil
• The Fluke 1625-2 earth ground tester can measure earth ground loop resistances using only clamps
• With this test method, two clamps are placed around the earth ground rod and each are connected to the tester
The Fluke 1625-2 improves your earth ground testing process with:
• Automatic Frequency Control (AFC) - identifies existing interference and chooses a measurement frequency to minimize its effect, providing more accurate earth ground value
• R* measurement - calculates earth ground impedance at 55 Hz to more accurately reflect the earth ground resistance that a fault-to earth ground would see
• Adjustable limits - for quicker testing
The Fluke 1625-2 gives you versatility in earth ground testing[b]
• 3- and 4-pole fall-of-potential, earth resistance loop testing
• 4-pole soil resistivity testing
• Selective earth ground rod testing using 1 clamp
• Stakeless earth ground rod testing using 2 clamps
[b]The Fluke 1625-2 offers you simpler, faster earth ground tests than ever before
• The 1625-2 offers internal memory storage up to 1500 records
• Accessible via USB port for rapid data transfer and viewing of results
• This earth ground tester also gives you world-class accessories that take the tedium out of earth ground testing
Additional tool features
• Heavy duty stakes can be hammered into dry, hard soil.
• And new color-coded wires make setup simple and help eliminate mistakes and speed up setup and tear down time as much as 50%
• IP56 rated for outdoor use
• Rugged carrying case
Key Features
The Fluke 1625-2 is a unique earth ground tester that can perform all four types of earth ground measurement:
• 3- and 4-Pole Fall-of-Potential (using stakes)
• 4-Pole Soil Resistivity testing (using stakes)
• Selective testing (using 1 clamp and stakes)
• Stakeless testing (using 2 clamps only) Adjustable limits - for quicker testing
• IP56 rated for outdoor use
• Rugged carrying case
• Be aware of voltage easily - the tip glows red and a beeper sounds when voltage is detected
• Continuous self-test so you always know it’s working
• Voltage detection range for wide application use - 90 V to 1000 V AC or 200 V to 1000 V AC
• Audible/Silent mode for added convenience
• Continuous self-test so you always know it’s working
• Voltage detection range for wide application use - 90 V to 1000 V AC or 200 V to 1000 V AC
• Audible/Silent mode for added convenience
Fluke PRV240 Proving Unit adalah sumber tegangan bertenaga baterai berukuran saku yang portabel. Alat ini unik karena menjadi sumber tegangan ac dan dc stabil untuk instrumen LoZ dan HiZ.
Dirancang untuk keamanan dan kepatuhan
Fluke PRV240 yang memberikan metode aman untuk memverifikasi alat uji listrik Anda beroperasi secara benar sebelum Anda melakukan pengujian secara langsung. Konsep TBT atau “Test Before Touch” (Uji Sebelum Menyentuh) mencakup pengujian alat Anda terhadap sumber langsung yang sudah diketahui sebelum dan sesudah pengukuran sebenarnya. Urutan ini untuk membuktikan bahwa alat uji Anda beroperasi secara benar selama pengukuran sebenarnya.
Lakukan verifikasi alat uji Anda tanpa terkena paparan kejutan listrik dan busur api listrik yang tidak perlu. Penggunaan PRV240 mengurangi kebutuhan perlengkapan pelindung pribadi (APD) apabila sebelum menguji, sumber tegangan yang diketahui tidak tersedia untuk diverifikasi alat uji atau multimeter Anda sebelum melakukan TBT. APD masih diperlukan ketika tidak ada pengujian tegangan.
Sekilas Produk
• LED tunggal menunjukkan fungsionalitas, menjadikan unit ini solusi sederhana agar sesuai dengan verifikasi TBT pada alat uji Anda
• Tegangan bersumber melalui kontak tersembunyi yang diaktifkan saat probe diuji dimasukkan untuk menghindari kontak yang tidak disengaja
• Termasuk Tali Gantung Magnetik TPak™
• Masa pakai baterai yang lama—5.000 tes per set empat baterai AA
Fitur utama
• Mengurangi risiko kejutan listrik dan busur api listrik dengan memvalidasi fungsionalitas alat uji tanpa menempatkan diri Anda dalam lingkungan listrik yang berpotensi berbahaya
• Sumber tegangan ac dan dc yang stabil—memasok dc/ac 240 V
• Kompatibel dengan impedansi tinggi atau impedansi rendah multimeter, clamp meter atau dua penguji tiang
Dirancang untuk keamanan dan kepatuhan
Fluke PRV240 yang memberikan metode aman untuk memverifikasi alat uji listrik Anda beroperasi secara benar sebelum Anda melakukan pengujian secara langsung. Konsep TBT atau “Test Before Touch” (Uji Sebelum Menyentuh) mencakup pengujian alat Anda terhadap sumber langsung yang sudah diketahui sebelum dan sesudah pengukuran sebenarnya. Urutan ini untuk membuktikan bahwa alat uji Anda beroperasi secara benar selama pengukuran sebenarnya.
Lakukan verifikasi alat uji Anda tanpa terkena paparan kejutan listrik dan busur api listrik yang tidak perlu. Penggunaan PRV240 mengurangi kebutuhan perlengkapan pelindung pribadi (APD) apabila sebelum menguji, sumber tegangan yang diketahui tidak tersedia untuk diverifikasi alat uji atau multimeter Anda sebelum melakukan TBT. APD masih diperlukan ketika tidak ada pengujian tegangan.
Sekilas Produk
• LED tunggal menunjukkan fungsionalitas, menjadikan unit ini solusi sederhana agar sesuai dengan verifikasi TBT pada alat uji Anda
• Tegangan bersumber melalui kontak tersembunyi yang diaktifkan saat probe diuji dimasukkan untuk menghindari kontak yang tidak disengaja
• Termasuk Tali Gantung Magnetik TPak™
• Masa pakai baterai yang lama—5.000 tes per set empat baterai AA
Fitur utama
• Mengurangi risiko kejutan listrik dan busur api listrik dengan memvalidasi fungsionalitas alat uji tanpa menempatkan diri Anda dalam lingkungan listrik yang berpotensi berbahaya
• Sumber tegangan ac dan dc yang stabil—memasok dc/ac 240 V
• Kompatibel dengan impedansi tinggi atau impedansi rendah multimeter, clamp meter atau dua penguji tiang
The Fluke 1623-2 GEO Earth Ground Tester offers data storage and download capabilities via USB port. World class accessories will simplify and speed up testing time.
Fluke 1623-2 GEO Earth Ground Tester summary
• 3- and 4-pole Fall-of-Potential, earth resistance loop testing
• 4-pole Soil Resistivity testing
• Selective earth ground rod testing using 1 clamp
• Stakeless earth ground rod testing using 2 clamps
• IP56 rated for outdoor use
• Rugged carrying case
• USB data storage and transfer
Fitur utama
Stakeless Testing
The Fluke 1623-2 earth ground tester is able to measure earth ground loop resistances using only clamps. With this test method, two clamps are placed around the earth ground rod and each are connected to the tester. No earth ground stakes are used at all. A known, fixed voltage is induced by one clamp and the current is measured using the second clamp. Then the tester automatically determines the resistance of the earth ground rod. This test method only works if a bonded earth ground system exists for the building or structure under test, but most are. If there is only one path to ground, like at many residential applications, the Stakeless method will not provide an acceptable value and the Fall-of-Potential test method must be used.
With Stakeless testing, the earth ground rod does not need to be disconnected - leaving the bonded earth ground system intact during test. Gone are the days of spending time placing and connecting stakes for each earth ground rod on your system - a major time saver. You can also perform earth ground tests in places you’ve not considered before: inside buildings, power pylons, or anywhere you don’t have access to soil.
The Most Complete Tester
The Fluke 1623-2 is a unique earth ground tester that can perform all four types of earth ground measurement.
• 3- and 4-Pole Fall-of-Potential (using stakes)
• 4-Pole Soil Resistivity Testing (using stakes)
• Selective Testing (using 1 clamp and stakes)
• Stakeless Testing (using 2 clamps only)
Fluke 1623-2 GEO Earth Ground Tester summary
• 3- and 4-pole Fall-of-Potential, earth resistance loop testing
• 4-pole Soil Resistivity testing
• Selective earth ground rod testing using 1 clamp
• Stakeless earth ground rod testing using 2 clamps
• IP56 rated for outdoor use
• Rugged carrying case
• USB data storage and transfer
Fitur utama
Stakeless Testing
The Fluke 1623-2 earth ground tester is able to measure earth ground loop resistances using only clamps. With this test method, two clamps are placed around the earth ground rod and each are connected to the tester. No earth ground stakes are used at all. A known, fixed voltage is induced by one clamp and the current is measured using the second clamp. Then the tester automatically determines the resistance of the earth ground rod. This test method only works if a bonded earth ground system exists for the building or structure under test, but most are. If there is only one path to ground, like at many residential applications, the Stakeless method will not provide an acceptable value and the Fall-of-Potential test method must be used.
With Stakeless testing, the earth ground rod does not need to be disconnected - leaving the bonded earth ground system intact during test. Gone are the days of spending time placing and connecting stakes for each earth ground rod on your system - a major time saver. You can also perform earth ground tests in places you’ve not considered before: inside buildings, power pylons, or anywhere you don’t have access to soil.
The Most Complete Tester
The Fluke 1623-2 is a unique earth ground tester that can perform all four types of earth ground measurement.
• 3- and 4-Pole Fall-of-Potential (using stakes)
• 4-Pole Soil Resistivity Testing (using stakes)
• Selective Testing (using 1 clamp and stakes)
• Stakeless Testing (using 2 clamps only)