Digital multimeter
Fluke 27 II Rugged Digital Multimeter
The Fluke 27 II Digital Multimeter define a the standard for operating in harsh conditions with the features and accuracy to troubleshoot most electrical problems. Both meters have IP 67 (waterproof and dustproof) rating, MSHA approvals, extended operating temperature range of -15 °C to +55 °C (5 °F to 131 °F, -40 °C for up to 20 minutes) and 95% humidity, and have been designed and tested to withstand a 3 m (10 ft) drop. The Fluke 20 Series Multimeters are built to work in the toughest environments.
Key Features
• Measure up to 1000 V AC and DC
• Measure up to 10 A (20 A for 30 seconds)
• 10,000 μF capacitance range
• Frequency to 200 kHz
• Extended AC voltage bandwidth – 40 Hz to 30 kHz
• Resistance, continuity and diode test
• Min/Max and average recording to capture variations automatically
Key Features
• Measure up to 1000 V AC and DC
• Measure up to 10 A (20 A for 30 seconds)
• 10,000 μF capacitance range
• Frequency to 200 kHz
• Extended AC voltage bandwidth – 40 Hz to 30 kHz
• Resistance, continuity and diode test
• Min/Max and average recording to capture variations automatically
Download
Product Lainnya
Double your strength
The Fluke 787 was the first device to combine a DMM and a loop calibrator to give process technicians double the power in one tool. Now even better, range is extended in the Fluke 789 – the ultimate loop calibration multimeter. The Fluke 789 has a 24-Volt supply loop which eliminates the need to take a separate power supply when testing transmitters offline. And with selectable onboard 250-Ohm Hart® resistors, the need to carry separate resistors is eliminated. Now process engineers can do more while carrying far less.
The Fluke 787 was the first device to combine a DMM and a loop calibrator to give process technicians double the power in one tool. Now even better, range is extended in the Fluke 789 – the ultimate loop calibration multimeter. The Fluke 789 has a 24-Volt supply loop which eliminates the need to take a separate power supply when testing transmitters offline. And with selectable onboard 250-Ohm Hart® resistors, the need to carry separate resistors is eliminated. Now process engineers can do more while carrying far less.
Menetapkan standar multimeter baru
Tiga model dari Seri 170 baru merupakan patokan baru untuk multimeter umum. Ketiganya menetapkan standar dengan kombinasi presisi, fitur, penggunaan yang mudah, keselamatan, dan keandalan.
Fitur utama
• Pengukuran arus dan tegangan RMS Sejati
• Akurasi dasar sebesar 0,09% (177, 179)
• Resolusi 6.000 hitungan
• Tampilan digital dengan analog bargraph dan backlight (177, 179)
• Rentang manual dan otomatis
• Display Hold dan Auto Hold
• Pengukuran frekuensi dan kapasitansi
• Pengukuran resistansi, kontinuitas, dan dioda
• Pengukuran suhu (179)
• Pencatatan min.-maks.-rata-rata
• Mode stabil memungkinkan penyaringan input berubah-ubah
• Penggantian baterai yang mudah tanpa membuka kotak luar
• Kalibrasi kotak tertutup melalui panel depan
• Kotak ergonomis dengan sarung pelindung terintegrasi
• EN61010-1 CAT III 1.000V / CAT IV 600 V
• Mengukur dua kali lebih cepat dari multimeter lain
Kepatuhan Keselamatan
Semua masukan terlindungi IEN61010-1 CAT IV 600 V/CAT III 1.000 V. Terdaftar UL, CSA, TÜV dan Menunggu Keputusan VDE
Tiga model dari Seri 170 baru merupakan patokan baru untuk multimeter umum. Ketiganya menetapkan standar dengan kombinasi presisi, fitur, penggunaan yang mudah, keselamatan, dan keandalan.
Fitur utama
• Pengukuran arus dan tegangan RMS Sejati
• Akurasi dasar sebesar 0,09% (177, 179)
• Resolusi 6.000 hitungan
• Tampilan digital dengan analog bargraph dan backlight (177, 179)
• Rentang manual dan otomatis
• Display Hold dan Auto Hold
• Pengukuran frekuensi dan kapasitansi
• Pengukuran resistansi, kontinuitas, dan dioda
• Pengukuran suhu (179)
• Pencatatan min.-maks.-rata-rata
• Mode stabil memungkinkan penyaringan input berubah-ubah
• Penggantian baterai yang mudah tanpa membuka kotak luar
• Kalibrasi kotak tertutup melalui panel depan
• Kotak ergonomis dengan sarung pelindung terintegrasi
• EN61010-1 CAT III 1.000V / CAT IV 600 V
• Mengukur dua kali lebih cepat dari multimeter lain
Kepatuhan Keselamatan
Semua masukan terlindungi IEN61010-1 CAT IV 600 V/CAT III 1.000 V. Terdaftar UL, CSA, TÜV dan Menunggu Keputusan VDE
Fluke 175 is the baseline for industrial measurements
The Fluke 175 True RMS Digital Multimeter delivers the baseline general purpose features required by professional technicians around the world. You can find problems fast with all the basic troubleshooting measurements such as frequency, capacitance, resistance, continuity, and diode. And Display Hold and Auto Hold will help you capture significant events.
Safety rated for industrial use
All inputs on the 175 are protected to IEN61010-1 CAT IV 600 V/CAT III 1000 V. UL, CSA, TÜV listed and VDE Pending. You can rely on the Fluke 175 for accurate, true-RMS readings through years of reliable service.
Need More Accuracy or Temperature Measurements?
If you need a higher degree of accuracy or contact temperature measurements click here see Fluke 177 and Fluke 179 True RMS Digital Multimeters
Other useful features
• Safety rated CAT III 1000 V, CAT IV 600 V
• Comes with a lifetime warranty
• Allows closed-case calibration through front panel
• Includes ergonomic case with integrated protective holster
Key features
• Provides the baseline multimeter features you need for troubleshooting and repairing electrical and electronic systems
• Delivers accurate true-RMS AC current and voltage plus frequency, capacitance, resistance, continuity and diode measurements
• Increases productivity with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-average recording
The Fluke 175 True RMS Digital Multimeter delivers the baseline general purpose features required by professional technicians around the world. You can find problems fast with all the basic troubleshooting measurements such as frequency, capacitance, resistance, continuity, and diode. And Display Hold and Auto Hold will help you capture significant events.
Safety rated for industrial use
All inputs on the 175 are protected to IEN61010-1 CAT IV 600 V/CAT III 1000 V. UL, CSA, TÜV listed and VDE Pending. You can rely on the Fluke 175 for accurate, true-RMS readings through years of reliable service.
Need More Accuracy or Temperature Measurements?
If you need a higher degree of accuracy or contact temperature measurements click here see Fluke 177 and Fluke 179 True RMS Digital Multimeters
Other useful features
• Safety rated CAT III 1000 V, CAT IV 600 V
• Comes with a lifetime warranty
• Allows closed-case calibration through front panel
• Includes ergonomic case with integrated protective holster
Key features
• Provides the baseline multimeter features you need for troubleshooting and repairing electrical and electronic systems
• Delivers accurate true-RMS AC current and voltage plus frequency, capacitance, resistance, continuity and diode measurements
• Increases productivity with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-average recording
The Fluke 50 Series II contact thermometer offers fast response and laboratory accuracy (0.05% + 0.3°C) in a rugged hand test kit.